1st Gen Lunchtable Thread - General Discussion

You want a spare 22r w/ a ported 20r head and LCE dual row adjustable cam?

 

Try replacing a Prius cat. They’re the most efficient ones because hybrids are under the most scrutiny by the air resource board. They’re huge money.

 

i'll call you if I blow up this one

 

On that front sensor make sure no exhaust leaks after you get it on, there's a chance those conditions that trigger those two DTCs can both be corrected with that new sensor. It'd be the first thing I'd replace after ensuring no vac leaks pre MAF sensor and no exhaust leaks between manifold and cat convertor

 

sweet. Leaking a good bit of engine oil at the back of the head right below the valve cover so I figure its the VC or half moons... unless the HG is fucked

 

I've got two early 22r's and 2 20r heads and one 22r head. Also have an LCE header if you're interested. Plus a couple webers, one 32/36 and one 38.

 

Does the 22r have half moons? It's been years since I've taken a valve cover off one of those

 

Yes, front and rear.

 

I've already got a Hooker header and a propane kit on it so no carb issues, it will run upside down

 

this kit is only $7.xx on Rock Auto, damn

 

I though about going that route but I stole the Taco's 3RZ instead.

 

Clack clack clack clack clack

 

at first I thought that was some shitty rendition in MS Paint lol

 

Ben Stiller saying "do it"

 

3RZ is a great choice

 

I've got an extra one sitting in the rafters at work. And an extra w59 and transfer case as well

 

My tolerance for getting on life is way too high for that weak sauce

 

at least I know what your expectations for me are

 

lmaooooo