Alabama thread!

Im on OME885 springs (590lbs I believe) and AAL. After putting the winch on, I think I’m just under 2 inches of lift in the front. I would like more but for now, it’s got a factory looking rake to it which I like. I think if I put skids on it would be way too low lol

 

What up Phil

 

Sup Preston
I spent a lot of time bothering Mike about what to go with. The rear should give me 2.1-2.25". I wanted to keep a 1/2-1" rake. I also bought adjustable IMS struts, so I should be able to fine tune things.

 

Sup Josh

 

Give you $5 and a reach around

 

Hammer Hangers done. @BamaTaco56 your my favorite tacoma worldian

 

Already claimed you cheap ass.

 

IMS was out of stock yesterday. I bought..

Front Springs: C59-354 - 60mm (2.4") lift, Heavy load front end (110-240lbs), or 70mm lift (2.75") lift with no weight on front end
Front Shocks: GS59-220 - Twin tube - nitrogen charged, adds 1" lift height to coils
Rear Leaf Springs: L59-111-R Raised Height (55mm Lift, 2.1"), Heavy Duty, 600LB constant load
Rear Shocks:

$315 GS59-940 Dobinsons Pair of Rear Shocks Compatible with Toyota Tacoma 4x4 2005-2018 - GS59-940

GS59-940 - Twin tube, nitrogen charged, suitable for 2-3" lift.

And have JBA UCAs

 

Sup Matt

Sup Scotty

Nice. I bought Bilstein 5160 with resi's for the rear. I got them cheap off Amazon.

 

I said and a reach around. Thats worth more than $95. I was giving you a deal

 

Bruh, i just took off a set of 111-R leafs and went to a 112-R. Could of saved you some doh.

 

Well shit...I even remember seeing that. Totally forgot. @Crikeymike even responded I think! He just wanted another sale!

 

with a 50 tooth rear itll get you there in a hurry. this fall a 72 tooth is going back on itll make sure you get there and drag whatever hangs you up.

 

don't go 887s

 

he lives!

why not 887?

 

mine sagged heavily very quickly. they are ok. but they will sag. mine are the 887x or whoever.

good seeing you too trey.

 

funny I thought of you the other day cleaning out my truck. I still have yet to get that bushing put in. just bunch of mess came up. although it really hasn't vibrated much.

 

That should be a good size sprocket

 

I haven’t gone in a while. Probably been about 4 years now.

 

I just started again after buying my own. I always used a tube or knew someone who had one. now that I'm close to more accessible water down here I can actually go although I've been down here almost 10 years. I'm from pinson.

but yeah been enjoying it and the trips to oak mountain.