What have you done to your Tacoma today? 1st Gen Edition

Have you seen a double-din head unit that does dash-cam DVR duty? I've got the only one I could find installed, but its a Pyle and it truly is a pile. It's a bummer that the big-boys like Kenwood or Pioneer dont have a headunit that will do front and rear dash-cam.

 

Love your attitude. Stoked to see what you cook up for this

 

I just bought a 4 camera setup that goes with any head unit

 

What was it called, please? Thanks

 

If you're trying to offload a set of whitelines, I'd be happy to pick them up from you. I've had nothing but success with them so far, about 40k miles completely squeak free, help the front end feel solid, and no cracks or delamination despite being completely crossed up to max out caster.

Those strongflex ones look interesting, but at $105 I'll let Monte try them first.

 

Nice! Swapping the double cab thats a big job. I didn't cut into the body mounts on mine, I cut into the firewall just before the body mounts. All okay with no rubbing so far!

 

Sorry I don't. But Id think there should be plenty of options out there that have multiple camera inputs. Might just be camera inputs though not reverse specific.

Will do...and Mike apparently too haha

 

Finally no more CEL.



Now the abs light...

 

Oh Toyota.

 

I just did all that frame repair and couldn’t get everything I wanted. Hoping to find a solid frame and swap in the next few years.

 

Not a bad way to go. This one is thin in places, but with enough time, I think it'll be ok.

 

Got it for 50 and had to buy cameras separately

 

Rust all the way down.

 

Jeeeze. 1st time running led's at night...garbage.....glad i kept my retros

 

What bulbs did you get

 

Led's. The. Darker it gets, the more i cringe. They were off Amazon

 

Oh shit. High beams are worse

 

Do they have the little shield dudes?


https://www.ebay.com/itm/264740365902
These are what I have, they aren’t terrible. I can go get a picture if you want.

 

Any chance you are planning on tieing into the MAF temp sensor wires? I've been wanting to do this with my turbo setup. I don't have room for the MAF in the charge pipe but would like to get accurate temp reading for the ecu to see what's happening.

 

Got the front diff pattern dialed in and started getting the locker portion set up!