What Have You Done To Your 2nd Gen Tacoma Today?

Sorry I meant the factory vinyl floor covering kit. It replaced the carpet with a complete custom mat

 

I’ll be honest if I didn’t have the punisher logo I probably would’ve taken it off by now but I like it so much I don’t think I’ll part with it. Just upgrade it in a year or two when it starts to fall apart

 

They go really well together, I like that I can still open the cover in the front and back!

There was a decent gap with the original weather sealing. I added additional weather stripping, but it has not rained in the last few days, looks pretty well sealed!

Top bars come off by removing a small bolt on each side and popping the bars out. Very easy I'd say!

 

I never saw any tacomas in Germany when I went. Must be pretty rare!

 

It looked lowered in the picture you posted.

 

Check out Taubenreuther. They are our top dealer out of Germany and will absolutely take care of you.
https://www.offroad24.de/index.php?n=DECKED-Drawers&pli=1066

 

After countless hours, ditching the metra kit and buying a Scosche, it’s finally in. Pioneer 2660 NEX. Fitment is still iffy, but I’m over it... maintained backup camera as well, which is cool

 

Well, I put on new uca's, ball joints and outer tie rods last Saturday thinking I was gonna get new tires and alignment on Sunday. Wheel works (where I was supposed to get my tires installed) was shut down due to covid and didn't ship my tires over to Firestone for my rescheduled appointment. Simple tire has sent out a new set of tires which will be here Saturday. So I've been driving around without an alignment for a week in which time I've thrown an ABS light, a tire sensor light, and now my battery is dead....

 

Don’t do it. figure out another way. I couldn’t get the broken extractor out, and drills just skipped on it and it’s still there. Or maybe just get an extractor set not made from chinesium?

 

Yeah I know it's not going to be a fun thing to tackle but I want to give it a shot with the extractor. I'm pretty sure mine are US-made.
I figure worst case if something goes terribly wrong and the drain plug remains stuck, I can use my fluid pump to stick down in the diff, drain the old goo out and put new goo into the diff.

 

Beautiful! All ya gotta do is take off the stickers, but leave the screen protector on.. and turn off the radio beeps function (feels less "aftermarket" if u turn off the beeps)

 

Go for it! now i’m thinkin that wven if you got an extractor stuck in the drain theres enough surface area to weld a nut on if you can if it goes sour.

 

Absolutely, we already set up the order through them. Looking forward to your product and I’m glad to support Idaho businesses.

 

Some thing like this got less chance of breaking . I got the snap on version .

$82 IRWIN Screw Extractor Set, Hex Head, Multi-Spline, 25-Piece (53227)

https://www.amazon.com/IRWIN-HANSON-53227-Multi-Spline-Extractor/dp/B0002SRG66

 

https://youtu.be/EWLxzuDMuhk

This is good. There are better/cheaper options according to this vid

 

Trimmed 4 inches off of the front OEM mud flaps. Back are 10" (standard) from the body. Fronts are now 8". Happy with the result. Used a razor blade and piece cut off served as a template for the rounded corners. Some use a Heat Gun, and that would have helped IMO. Note to trolls: not interested in "just take them off" comments.

 

Bummer:

How hard was the UCA removal/ re-install? Specifically
breaking the ball joint from the spindle? and
getting the long bolt to slip past the body?

 

I did the same. Unfortunately, I had to mod them more so the 33s didn’t rub on up travel. They still keep a lot of crap from flinging up the side of the truck.

 

Yeah funny thing is I've already tried that lol. I tried welding an allen socket into the stripped drain bolt, and the weld did not stick. I believe my drain bolt is aluminum.

 

Excellent! I think I might pick up this set before attempting this job actually. Those will certainly come in handy for me later on as well, I'm sure.

As much as I love Project Farm's videos those sets are for rounded nuts, and I'm battling a drain bolt with a very stripped, recessed allen opening.