Relocating the traction control button.

Looking to relocate the traction control button from beside the steering wheel to above near the locking diff. I am having trouble finding any post or connector info on how to do this. I'd like to either buy an extension cable that would allow me to do this or make one. Does any one know where to get one of what the connector plug is called so that I can make one?

 

But why?

 

Cause I want to mount a radio mic and connector where it is. It's a button I rarely use and have bumped it multiple times while off roading.

 

You must have A LOT of spare time. Good for you.

 

Surprisingly, not as much as I wish I had. This is more of those order all the parts and eventually get around to it.

 

I make two lists...
One list is titled "Must Have" and the second list is titled "Like to Have." Like to have is dormant until it becomes Must have. Good luck.

 

Trd pro’s have that button already mounted in the top next to the crawl control and sunroof. Maybe try getting the wire harness off of one and using that wire ... best of luck

 

Its up there on my Off Road too.

 

If you zoom in on that connector you will see the SECOND half of the part #.. so to order that connector you would add 90980 to the front of that.

90980-12550

Hopefully someone here knows what the matching connector would be. Then it's a simple process of making your own harness.

 

Would you happen to know how to get the right pins for the connector housing? Im trying to do the same thing but I wanna relocate mine to where my ECT switch used to be.

 

If this file attachment works

You look up the housing part number in the housing part # list and it will give you a code for the pin types and wire sizes,
That you then look up in the next section (TABLE OF REPAIR WIRE, TERMINAL PACKING,HOLE PLUG AND PRESS SLEEVE)for the part#

 

You definitely need @caribe makaira

 

Ya my 17 OR is already up there by the sunroof and locker, are the 20’s not?

 

Alot of great info. Thanks guys

 

Anyone have a picture of the overhead traction switch? (removed) It's smaller and has a different connector.

 

Man I want to do this too, my 2020 is driving me nuts compared to having it above like on my 2018.

 

I am going to try this. I ordered the following terminals. Shipping was outrageous but still cheaper than going through a dealer.

https://www.hi-1000ec.com/phone/product/1201
https://www.hi-1000ec.com/phone/product/1210

 

You could just run the dark blue wire to the overhead and tap the rest there for the switch. ( Illumination & Ground)