What Have You Done To Your 3rd Gen Today?

it appears to be Spanish sentence structure. I’m guessing... “this is his truck after lots of mods on the interior and exterior, from small things to big things including a regear.”

keep up the solid work @Rob Dogg

 

I think you need moar lights

 

What sliders do you have? They are so low profile.

 

MOAR lights?

 

Ustedes son indiferentes!

 

Ay Hue....

 

Nice with the white paint!

 

I can't remember offhand what part #'s I used, but the "two way breather" only went one way. I could blow air through it, but if I tried sucking air in, it would close. So, probably not two way, and just another chance to create a vacuum. In the end, I took the breather apart, there was a spring and rubber seal inside that was closing it off. I took those out, put the cap back on and a split ring to keep it open against any suction. Routed it up behind the tail light and left a good amount of hose in case I ever got to that fully extended shock height, doubtful for my driving situations, but I had the extra-long hose so why not. I think part numbers are slightly different in Canada, but the toyota spigot fit perfect without the need for teflon tape, no leaks, clean diff.

 

I like various diameters of accessory cord and webbing from Mountain Equipment Co-Op. Non dynamic, so no stretch, colorful so you can organize lengths by colour or intended use. Plus I used to climb a lot, so it reminds me of those days of fun on the rock.

 

Are those the Clazzio with red stitching? I'm waiting on a set from Clazzio, Black with Red stitching, but they are delayed due to Covid and shipping delays. Those look really nice. Clazzio has offered other colours, but I really want the black/red to match the truck.

 

Awesome, thanks! Did you use the slim fit or the full size?

 

You'll love them.

 

I remember going to the Houston Livestock Show and Rodeo in the dome as a kid. Ahhhhh, those were the days!

 

Plywood bed divider. Pop it in, pop it out.

 

I would rather have a bottle in front of me than a frontal lobotomy.

 

I learned to fly at Quantico, and “ships graveyard” was a reporting point for us. I also spent a ton of time as a teenager on boats right there. Thank you for the memories!

 

Stealing. Great solution.

 

@riggityj

Looks like it's plenty secure. It stays in place no matter which way you turn the truck. I like it!

Oh yeah, welcome to the forum from Eastern North Carolina !

 

How about small package USPS?. I've had good luck with a few things from te states via US Post, and not super expensive.

 

Teflon tape is technically not a thread sealer, it is an anti seize agent. The sealing part is a sometimes side benefit. That said, there are tapes that are specially made for sealing but standard Teflon tape is not.