What Have You Done To Your 2nd Gen Tacoma Today?

Don’t get out much, eh?

 

Thanks for posting this. I put in a new headunit that has Android auto and just had the USB cable flopping over the steering wheel. Had no idea such a product existed!

 

I ordered the same one from the same seller. Mind keeping me in the loop with how Amazon takes care of you?

 

https://www.youtube.com/watch?v=9gTerVtbOuo

 

Seat Spacers , I will be shutting down for 6-8 weeks for re-locating my shop. If you send money by mistake I will get it refunded. Thank everyone for your past purchases.

 

My bank account says otherwise

 

Front end rebuild.

LCAs: new ball joints, Whiteline bushings, Taco Tab cam delete. Used the Max caster and neutral camber tabs. Set toe with string method.

CVs: New boots

Steering rack: New Poly performance bushings, new inner and outer tie rods.

New wheel bearings.

King 2.5 ext travel coilovers with 600lb 14” springs from Accutune.

various new hardware and seals.

New Rotors.

Was a busy, sometimes frustrating 4 days.

 

Too bad they don’t make lights for 12-15

 

Thank you sir

 

Anyone know the best quality UV protection film for headlights? I retrofitted an ebay housing and the clear coat on the lens in peeling and yellowed. Not too worried about it as I'm just going to sand it all off and polish to get them back to a nice finish but I would like to apply a nice sealant or UV film

 

im saving money cause they don’t. Otherwise, I would be buying them

 

This is my next project and this is what I purchased. It has a 3M backing. If you cut it in half. its the perfect size for both of the 2nd Gen headlights

$34 3M Clear Extra-Wide Headlight Protective Scratch-Proof Wet-Apply Tint Vinyl Wrap Film 15" x 48" Roll Including Hard Yellow Detailer Squeegee

https://www.amazon.com/dp/B0728HQ3J7

I would also recommend this ceramic coating kit. It will protect the vinyl and increase the life by several years

Gtechniq - EXOv4 + Crystal Serum Light (CSL) + Panel Wipe Kit - All in One Detailing Bundle, Paint Protection, Decontaminate, Great Gloss Retention, Water and Dirt Repellency (30 milliliters)

https://www.amazon.com/dp/B077J8VBS...olid=3S16MLFLNX6OS&psc=1&ref_=lv_ov_lig_dp_it

 

Evidently they will be making them soon tho.
Per Instagram page:

 

Post up the results of that film if you don't mind! I've heard good and bad things about vivid, my main concern is the film conforming to the shape of the headlights.

Thanks

 

Heavy skid plates are the best, especially if you do things like disconnect your sway bar, or install armor. The weight is the lowest on the truck. Helps offset the weight of stuff above the center of balance.

 

Will do. I'll probably do it later this week, after the Hurricane passes

 

Oh crap, there goes my money

 

Which ones did you get? Im looking at the ones for like 400 bucks

 

I was having the same issue and I think these little guys look cool and work even better! Glad i could help!

 

Which "ones" are you talking about?