What Have You Done To Your 2nd Gen Tacoma Today?

this is what im afraid of hahah i think i need some assistance in tuning it

 

Happened to my 2010 about a year ago, replaced the blower resistor twice, when it burnt out a third time I just replaced the blower motor and I haven’t had an issue since

 

Is that in The Needles?

 

Where did you wire your lights too? Tell me where you got the gauges. Thanks.

 

I'm sorry that happened to you. I am speaking with Toyota HQ now since my entire HVAC system was replaced in late 2017. Maybe they can help out. The dealership wanted $650 for the blower motor and harness replacement. We'll see what happens!

 

I wired the raptor lights to the trailer brake light circuit using an add-a-fuse, it is behind the firewall, as the fuses under the hood are either always on, or only on with headlights / side markers, and I wanted the lights to be on when the truck is running. The gauge mount is a Flexpod from Cravenspeed, and the gauges themselves are from Speedhut.

 

I work in MKE, live in Caledonia

 

Finally got my tires in, being mounted now along with an alignment.

Upgrading from 265/75r16 goodyear duratracs to 295/75r16 nitto ridge grapplers

 

Fucking all of it

 

Welllll….Toyota told me to kick rocks. I will fix it myself. Ill do the motor and the harness.

I saw a few threads on this. Which thread is best thread? Thanks all! Here's a pic of my headlights for your enjoyment.

 

About to do some more chopping myself.
Going from 295s to 315s


I have a date with ECGS on the 24th to help turn these bitches.

 

took her to work

 

Had a special moment yesterday!

 

I installed a new heat shield, got two bolts loose for the canister (the bed will have to come off to replace the canister).
Tried to remove the bracket for the rear ABS wires, where it attaches to the canister (I mangled the canister bracket, good thing I have a new canister). Still not able to unbolt the ABS wire bracket.

Got my connectors wired up for the power mirror (pass mirror connector on back order).

 

Installed a new Spiral Cable. Had the first one done as a recall. I guarantee the Dealer didn't torque the steering wheel nut to 37 ft lbs on the first one.

 

Installed an OVS 180* awning. Glad I didn't purchase anything else, freestanding awnings are pretty awesome!

 

Yep. Needles Highway.

 

I installed some bags and the wirelessone kit into my 08. Even though i have the leaf spring recall replacement I still found the ride sat low even with modest weight. The wirelessone hardware fit in the rear cubby and I can controll the ride from my phone or remote and there was no need to wire anything in the cab.

 

is SO worth it....!