TACO GARAGE - Any camera - anytime, plug and play, steering wheel controlled. 2020!

You can get the eTune3 camera directly from the MFG. You'll still need the cables and camera but if you need the link for the Germes eTune3, let me know.

 

I have a 2017

 

Thanks for the tips to find another one. DIY has been invoked.
But although refunds have been started, and it's day one, bank shows no refund yet.

 

Is this problem, just with the 2020 version.

 

etune3 vs etune2.

2020 has etune3.

 

What problem is that?

 

Found a GL RFCC TTG2 from Car Solutions out of Hong Kong for 120, 145 after shipping from DHL that's arriving the 29th!
Was pleasantly surprised.

 

Post #1037

 

I'm presuming he ordered the older kit for his 2019 Tacoma not the newer kit for the 2020...

EDIT: so nothing do with the 2020 kit.

 

The kit i want is for the 2019.

 

In which case order from Amazon or car solutions.

 

So I finally decided to call and check on the status of my order for a Camera, grill bracket and Entune 3 camera controller that I ordered 3 weeks ago and was informed that the delay in shipping is due to the Cameras being delayed in arriving to The Taco Garage. I was told that they expect to have my items ready to ship out in a week or two once the cameras are delivered to their location. Figured I would give an update on my situation in case anyone else is in a similar spot.

 

Plenty of camera choices out there, ask to refund the camera and send the rest of the gear.
FYI I made a camera bracket all you need is a 1”x2” wide bit of plastic, drill a hole for the screw and one for the camera, use The supplied shims and done.

 

Has anyone had issues with the germes module not working over time? Just wondering the reliability of the kit as opposed to going with a plug and play harness and designated camera switch

 

Camera bracket on 2020 OR grill. All you need is a bit of plastic or metal 1”x2” and a drill...

 

im so confused. So is the 2020 kit available and fully functioning or is it not working yet?

 

It is available and my understanding is that it is working but don’t quote me on that. I know a few people from the forums mentioned installation issues regarding switches needing to be turned on/off on the controller in different configurations and there was also some mention of a firmware update resolving some issues. It’s worth the gamble for me to give it a try.

 

Who has this mounted to the stock 2019 or grill. Really want to get this installed but can’t find a good placement on this grill

I did a little digging but didn’t get thru 55 pages
Thanks fellas

 

They actually offered to do that without me asking, but since everything should ship out within two weeks, I told them I would just wait for all of it to arrive as ordered.

 

Is working perfectly. Just need to change the position of one dip switch (I forget which). Simples...