vF Tuner for the 3.5L Tacoma

I thoroughly enjoyed 2.0 Base when it was first posted in the MT Thread. I was planning on running it but found that the Rev Limiter was accidentally at the Stock setting. So, @OVTune posted the SFOB tunes like the next day. I jumped on those while the Base tune was being fixed for release on FM.

IMVHO, SFOB is less of a change on 2.0 than it was on 1.05. This is certainly not a bad thing. Just that for me, it feels really close to Base with a bigger throttle response ramp like I posted above:

Some folks who did not like that SFOB 92 response stepped down that progression until it felt right for them. It is purely individualistic with nothing lost otherwise.

 

What is the rev limiter set at with 2.0? I’m usually not whomping on it to rev limiter unless I’m passing someone and I’m usually not looking at the RPM’s when I’m doing that.

 

7,250? Yep. I only rarely wind it out and almost never brush the new limiter as shifts feel perfect now. Stock at 6k, I was brushing off the limiter every day.

 

Wait! 2.0 AT limiter was accidentally left stock and the actual final release will have it raised to 7250!? Love this, I was disappointed after flashing 2.0 with the rev limiter. I thought I remembered it being raised, and it wasn't.

Sooo can't wait for 2.0 final FINAL. Higher limiter and gear locking are my jam.

 

As noted, it was for the 2.0 Base MT files posted in the MT thread. AFAIK, the 2.0 Base MT files in FM should be correct. I know that I saw the correct limiter in the 2.0 SFOB Prem VFT file, as well as experienced it. I have not opened any other file in vF.

Note that power feels like it is naturally peaking very nicely in the mid-6ks. I would expect the ATs to shift around there?

 

I assumed that if the 2.0 MT limiter was incorrect, that the AT limiter was also. No reason not to have the higher limiter on the AT tune as well. Peak HP is at 6000rpm... plenty of room left where the stock rev limit is set.
Fingers crossed for a higher rev limit with final final.

 

I don't understand? The 2.0 Full Base MT tune was posted in March:

SFOB Full / Final was posted a few days later.

 

Read who I quoted... they said the original 2.0 MT release, whatever confusing title it was released under, had the stock rev limiter, not 7250.

Us AT guys currently do not have the actual final of 2.0. We also have the stock rev limiter. I'm hoping that we will get the correct (7250) limiter, with the actual release of 2.0 AT actual "end last final complete" tune.

 

LoL! You quote me! That was our OVT 2.0 Final for MTs.

 

How long did most of you wait after sending out the System ID registration email?

 

It can vary as the file comes from a company in the UK. It can be a couple days to a week depending.

 

So um, which 2.0 M/T files have yet to be released in vft format?

 

All 2.0 MT files for all ECUs are available

 

I asked for 2.0 SFOB premium for 04B41 in .vft format via zendesk, was told to wait.
Not a big deal, but was under the impression that the files weren't ready (400 files to go through).

 

Your comments crack me up

 

Got the tune all loaded in. Wooooo this is a whole new truck

 

Enjoy it!

 

Just requested 2.0 04B41 .vft files via email again..

Can't wait to tinker with a coupla things..

 

These files are already done. I will email you the download link

 

Thanks Mat!