Eibach pro lift kit

Ride is pretty smooth. I only drove about 10 miles after install. 2 miles on surface streets and 8 on a freeway.

I have the eibach 1” block in the rear and of course the eibach shocks.

I would say adding just the front assembly would yield the bro lean.

I added the headstrong 1/4” spacer to accommodate for “taco lean” but now I have the inverted taco lean haha. At least it seems like it.

 

I would definitely agree that adding lift only in the front (even if only on lowest setting) is going to give you the squatted worm butt. I have 2" in front and 1.5" AAL in rear and everything is perfectly level (checked by tape, by eye it looks slightly squatted) all the way around.

 

Yeah. One of my good friends is a tech at an affiliate shop for Toyota. I usually take my truck to him for any service needs. He was on vacation so I took my truck for it’s last “free” service. I told them do a normal service without changing the oil. Basically, top off fluids, visual inspection of parts, rotate tires etc... I asked them to check the rear diff, change the squeaky clutch pedal and check out some rust spots on the roof line. Long story long, they held the truck the whole day and wanted to keep it until the next day. I refused. I picked up the truck after closing. And get this, they didn’t even change the clutch pedal.

 

Man that's rough. I just spoke with the service manager and he told me to come in in 2½ hours! Man I'm stoked to see this finished!

 

Haha yeah I was baffled.
Can’t wait to see your results.

 

can’t wait to see it with the 285s..gonna look sweet..make sure you post up some pics!

 

Just got mine done with 285's today. I'll post a pic at when I get home

 

Beautiful. I’m gonna throw one UPCs when I do the 285’s

 

Dude it's insane the difference. My truck feels like a completely different truck. The suspension is firm, but it feels the way that it should always have been. The control arms made a world of a difference too.

 

Yeah I wasn’t sure how to explain the ride haha. Definitely better.

did you install a spacer?

 

Lean spacer?

 

Yeah

 

Not sure why but 4 Wheel Parts can't seem to get my alignment right. I go again tomorrow morning and if they can't figure it out I'm asking for my money back and going somewhere else. Just frustrating.

 

Stock ucas?

 

Yes, just on the first notch.

 

Yes sir. I used the ¼" aluminum lean spacer from Wheelers.
I'm going to do a full list with links to everything I did. It came out perfect with zero rubbing too.

 

Good luck. It shouldn’t be a problem. Hopefully I don’t run into problems when I do mines.

 

Nice. I installed the spacer too. I have the inverted taco lean now haha. All good though, I’ve been finding a reason to run two batteries anyway haha

 

Thanks! I think it's just 4 Wheel Parts. When I was waiting for the alignment and for them to mount and balance my wheels I was talking to a guy outside with a lifted Wrangler who was having the same problem with them doing his alignment.