Alabama thread!

Not much, just kicks back.

You?

 

Bro, last weekend he got a tick on his balls. It’s been a rough week for that kid lol

 

Just hanging out at work

 

Yo, just relaxing untill Monday.

I'm ready for October around April every year.

 

Nice. I'm gonna have to wait until Thursday for that

 

Be safe, I’m hitting the bed.

 

They have been good for me so far but I’ve heard after they wear they lose grip pretty bad. But I’ve had no complaints so far.

 

Sup Brian

 

Have to give a massive thank you to @JBTacoma for working with me to get this thing together for 12 plus hours. I owe you big time!

Also thanks @InfernoChalupa for taking the time and coming in clutch with the drill! Couldn’t have mounted the driveshaft tonight with out you!

Welp got a transfercase and front diff now. Crossmember was perfect. Everything is perfectly inline! Ran into a couple of hiccups but nothing that can’t be taken care of! But she’s almost there!

 

I think I saw where you've got a bit more clearance over stock crossmembers...…...Will you still be able to run full skids if wanted?

 

I’m not sure haha. But i don’t see why not. Worst case scenario I have custom ones made lol.

 

I just wasn't sure. Hell, the tcase skid is pretty flat anyway...……...I think

 

I’ve got an extra inch or so over stock 4x4. Should work I don’t think an inch would change it that much

 

Shit, I have no clue

 

Lol. Your next buddy. Time to get that suspension on next week!

 

The only thing that really concerns me is the ECGS bushing install.

 

Just get an arb and that doesn’t matter ! It’s not bad as long as you have the tool.

 

I have the tool and a new axle seal. I still need to get either a 37mm socket or a piece of PVC to smack it in with. One of the guys from Colorado uses the PVC pipe and said he has done a bunch with no problems.

I honestly have no clue what that ECGS bushing does and that an ARB would get rid of it

 

Those little needle bearings get messed up inside the diff when you’re driving around and can cause pretty annoying vibrations and sounds when just in 2wd. The bushing is just a solid sleeve and eliminates those needles. Thus no more issues. The arb how it’s designed with the diff it eliminates the needle bearing as well.

 

Gotcha. I didn't realize that.
Should I go ahead and buy these kits?

Seal driver

Race Bearing