1st Gen Lunchtable Thread - General Discussion

No, this mount he sent me.

But if you have the blanks that go in the lower center console piece in the newer trucks lemme know

 

I'm at the range for the first time in over a decade.

 

Ill have to take a look. I think i have a few of those panels at the shop. But idk if they are the ones you need

 

I thought you despised guns

 

No, I'm indifferent. I think it's fun to shoot every once in a while but I've got better stuff to waste my money on. If other people wanna piss away money assembling their fourteenth AR, so be it. I think they're a boring topic to talk about, so I don't talk about them much

 

You can’t bolt a winch to rust

 

Yep, I shouldn't be surprised but I didn't even think twice about the idea of a filter kit being junk when I ordered it.

Guess I will have to order from one of the other actual dealers next time.

 

Guess we’re getting a couple cow elk tags.

so I’ll have a deer and 3 elk tags, too much work

 

Speaking of junk filters I bought a Toyota filter for the truggy to replace the STP one I just put on. It came with one of those oil change deals and figured it would be fine for an old 22r. Wrong.

Engine knocks on startup now til the oil flows again

 

I put in for cow first and bull as second choice. Got another bull tag

 

Just delete them

 

Last thing I want in CA is a higher tax expense

 

LOLWUT

That's going into the 4R

 

Sounds like you need an oil pump?

 

That's the problem; gun enthusiasts don't care for AR's

 

Woot for private land permits

 

When I bought the setup, the company I got them from only had 2 instead of the 3 I needed

These are them - https://www.paranoidfabrications.com/collections/toyota-tacoma/products/carling-switch-blank-plug

Seems he's been sold out for over a year now.

Maybe ask him to make one?

 

I used to be all about deleting shit I didn't like in vehicles... like EGRs and punching out the CAT but as I get older I care for that approach less and less.


From what I've read its more effort than it's worth to delete that airbag switch

 

@JKO1998

White is constant +12V, which connects to pin #2 on the switch.

Blue is from your lights/relay, and connects to pin #3 on the switch.

I opted to wire in an "Add A Circuit" coming from the fuse panel under the driver dash. I chose "IGN", which means, this tap will receive +12V whenever a key is in the ignition. This way, whenever the vehicle is on, my switch will light up as it's connected to pin #8 on the switch.

Black is negative, which connects to pin #7 on the switch.





Old pictures of the setup while lights off



Setup with lights on

 

Noooo

It's just gonna sit in his garage for 2 years