The SR thread, let's see them!

Negative offset wheels (or spacers -- I personally wouldn't use spacers so my wheel selection was narrow)
I bought a direct bolt on wheel set from SSC -- no hub rings needed
16x8
-25mm offset 3.5 bs
265/75/16 tires falken wildpeak atw3 114t
Heat gun to massage fender liners in areas where rubbing occurs.
-12mm offset is probably perfect if you dont want to rub at all.

 

Fishing line -- that's how I removed my 4x4 badge.

 

Sounds like a good plan!, Thanks!

Thanks, that seems pretty straightforward.

 

White

 

Do you have a picture of the side view? I'd like to see how it sits with those tires.
Thanks

 

My first Taco was a 2010 4Cyl 4x4 5 speed manual and I loved that truck. It constantly amazed me.

I pulled an F-150 out of the ditch with It in 4LO.

It hauled 3/4 of a yard of gravel In the box to level my sisters driveway. Around 2000lb. It was down at the end of travel on the suspension but the engine hardly noticed.

It hauled a box full of logs down from a steep bench in very deep snow and on a very steep access road.

It seemed to capture the true feel of the originals. I wish I could get a 4Cyl with the TRD Offroad features.

 

Right on thanks! I want Convenience package then

 

I'd personally keep the factory finish on those 4 runner wheels if you pick a set up. But that's just me..

 

Theres a couple of folks on the B/S/T forum selling their take off OR suspension setups. Low mileage and cheap.

I also hauled a ton of river rock in my 4 cyl when I first got it (in the bed). It was definitely overloaded but it was a short trip and surprisingly I wasn't riding on the bump stops (although it was squatting). I won't make it a habit, but time will tell if I damaged anything overloading like that. After 2000 miles it seems fine.

 

Nice! Thanks

 

Some pics of SRs that I saved for inspiration on my own truck.


This one isn't an SR, but its probably my favorite truck on TW (needed inspiration for black paint and this was it).

 

Always liked the look on 4Runners I’ve seen with them on. Matched them with Cooper AT3s in 255/75R17

 

Picked it up yesterday.

 

I've used it to remove emblems and those vent visors that stick to the outside of the door. It will get it off but usually it leaves some adhesive behind to deal with

 

Freshly washed

 

This is true

 

Congrats and Welcome

 

Upgraded my aluminum topper to a fiberglass topper yesterday.. Drove 4 hours, but couldn't pass it up for $500.. Made a beach day out of it anyway,, which made the wife more accepting of the purchase

 

As far as I am aware.. my SR headlights are all chrome, I believe the sr5 headlights have black around the side markers. Not sure how this plays in with the double cab. Like I said there are so many different configurations to keep track of