San Diego "Yard Sale"

Let me know if you decide to get rid of a set.

 

\im looking for rock guards for 1st generation tacoma 96 extra cab

 

Will most likely have a set for you soon...

 

Chrome exhaust tip $20.

Exhaust tip is dirty, was removed at 45k miles.

North County.

 

I have some 1st gen bilstein 5100s with stock coils on 3rd clip up for sale. Bilsteins have about 5000 miles on them, coils about 140k. Asking 150

 

can someone use those shock bucket spacers with Fox ext travel coilovers? may need to add spacer to OEM bumps too though yeah?

 

wait a minute.... is that what those spacers were for that came with the kit ?!?!?!

 

So these aren't installed correctly as in they should have spacers on top of the shock?

 

No, they are installed correctly. Spacers are a cheap way to compensate for proper setup.

 

Theoretically you can use spacers with any shock but it's not advised. I'd ask what you're trying to achieve in using a spacer?

Yes, if you use a spacer you'll also need to check your bump travel and make sure you're not going to bottom out on the shock before the bump.

 

I'm not sure. These were meant for the taco lean.

 

I would have to check droop too so as to make sure it stops at CO travel not on UCA uniball

 

My C/Os are Fox 2.5 Ext with 700lb 14" springs, Accutune says we shouldn't crank them any longer than 21" when the truck is sitting level. I just cant believe how little lift I get from these is all, was thinking the missing spacers was maybe the problem.

 

Yes

That's due to the suspension geometry, not poor shock design. At 21", you still have enough droop travel for the shock to work on rebound and not cause poor ride quality. These trucks aren't intended for the amount of lift we try and give them.

 

SOLD

 

You guys finish the new set already?

 

rear first gen fender flares (not mine)

https://offerup.com/item/detail/931724600/

 

I think I'll take those headlights