Accumulator Delete Kit - SOLD OUT - No More Kits

Correct, however a lot of people drive around with lights that are not set correctly.

 

It also helps when they do a 6” lift and dont adjust the aim

 

I miss that accumulator like a sore dick. Nice to pop through gear without that spongy feeling.

Know anyone who added a short shift kit?

 

I have a URD short throw shifter and a weighted shifter knob from @7r41lbr34k3r
All together with the ADM it makes a very nice driving experience.

 

Did this mod this afternoon, honestly didn't notice that huge of a difference. Real pain in the ass to remove/install some of the bolts so really hoping it doesn't leak so I don't have to tear into it again.

 

Bleed the clutch again. If it’s not noticeable, you’ve got air in the lines likely.

 

When I bled it there were only a few bubbles that came out then a steady stream of fluid, it also seems to be driving fine. Wouldn't there be symptoms of air in the line?

 

Honestly, your description matches my driving impressions (a page or two back). I may not have nailed the clutch bleed either but I sure tried. I definitely notice a difference, just don’t know that I would call it massive or game changing. It’s more subtle than that for me. I wonder if driving style makes a difference but I also suspect some of the disdain for the accumulator grows over time since the truck drives so nice without it?

I think some of the more experienced MT’ers maybe have greater spidey sense to these subtleties than I do. However, I haven’t seen anyone ever write that they wish they had not done the mod.

 

Looks like URD short shift install next weekend. Any tips are welcome!

 

dont cut your metal to install the 2 front bolts. drill holes instead, looks nicer in my opinion. buy some plastic caps/ grommet to cap the hole. the 2 screws nearest the center console are easier to get to. goodluck

 

Let us know how it goes, I plan on doing it as well but waiting for the kit to go on sale at $99.99 like it was just before I bought my truck.

 

I've been rolling around with the short shifter for a month and love it.
You don't need to drill holes I'd you've got a ratcheting wrench or rely skinny fingers like myself lol I love the feel of the shifter!

I installed the ADM last night but have not been able to test yet. Will check for leaks today and then give her hell

 

Yes

 

Here's my 2 minute review. The thing was a bitch to put on. Told my buddies 'this is like a 15 minute job!'... an hour later we're all drenched in brake fluid and balls deep under the truck lol. All good - it went in with a little convincing.
I've driven a standard transmission my whole life and HATED the way this truck drove.
Now, i've only moved the truck around in the drive way so far and there is for SURE more feel in the pedal... however, it's not as dramatic as i would have thought. I even installed the short shifter, stage 2 URD, and flywheel last weekend. However, it feels like a new vehicle all around.
I'm very happy with this mod and all the advice Trident has provided me. Man, much appreciated!!!!!
Best of luck with your future, we're here for ya

 

Wait until someone tells you about @OVTune ....

 

Already done sir - running SFOB 2.0 w/ alternator increase and prem octane

 

Wait until you get it in 4Lo and on the trail. That’s where the biggest difference is. No more jockeying the clutch pedal as much.

 

I'll give it a go this weekend.

I'm skid plate-less at the moment. RCI is taking 3 weeks longer than anticipated, so i'll be taking it easy this weekend. Only gravel and i need to watch under my skirt to make sure we don't get poked!

I did entire suspension (Bp51's all around), new leafs, brake lines, tie rods, sway bar linkages and bushings, rotors, brakes, clutch, flywheel and pressure plate.

This truck feels like a new vehicle!






Tuned, lifted, and built!!

 

My fingers are not skinny but not sausage fingers either! Been wrenching on motorcycles forever so getting creative to reach tight spaces is not a problem. At least I'll be sitting upright and not laying under the truck. I haven't received the URD kit yet but I have rounded up all the tools and gasket goo so I'm ready to have at it. I'll post a review after I complete the install.

 

After all that it better feel like a new vehicle!

Once you have your RCI armor, don't be afraid to use it. It works. Really. Effing. Well.

I should crawl under mine and get pics. Lol