Long Travel BS Thread

Gonna have to think about that for a second. Its a big expensive rabbit hole if I jump in it

 

Do it brother!

 

I did, but have bigger glass.
You can swap in an oem 4runner Piece and it’s works perfect.
I forget the part number.

 

OEM 4 runner fill neck? I assume from a 4th gen 02-09?

 

Not sure how well it will work for +2” glass or necessary but

https://www.tacomaworld.com/threads...berglass-bedsides-glassworks-write-up.448370/

I’d ask some shops that work on a lot of Toyota’s like DMZ if they’ve done it on that size bedside.

 

Yeah,
Pn is 77213-35370

Not sure if you’d need it really on 2” bedsides though. I’d install the glass, see if the fuel neck will reach. If not, get the part !

 

If you have Instagram, check out Bajamike. Good dude, small business and ships quick. A few of us on TW have given him our business.

..Lossless kit. Think I found the tank at Poly Performance on sale.

 

How much did that run ya? doesnt look like he has a link to a "shop" to check

 

@LTDSC what sort of setup and travel numbers are you getting out of the rear of your 4Runner? The wife says she doesn’t really want to jump but wouldn’t mind doing 40-50 through whoops

 

I use all of my 5up/5down of my 10” stroke. I’ve gotten to 30mph through the ones in Pismo. Could have gone harder but I bitched out after thinking about my tie rod snapping and ending it all.

 

10” is all? The wife is very disappointed. Hurry up and figure out how to fit some 12’s or 14’s under there without going through the floor of the cab

 

You can fit 12s but you’ll sacrifice up travel considerably.

 

Gotcha. This is all way down the road but we were talking about it and I knew you had done something to get bigger shocks out back

 

It’s kept up real nicely with the front for what I’ve put it through so far. Couldn’t be happier with it now.

 

Nice. Yeah we’ll probably throw a +2” kit up front and keep her on 33’s so she won’t need fiberglass. This is of course all hypothetical

 

You could do a three link with 8” coil overs on a 2:1 ratio. I’m picking up my setup from Dirt designs next week. I’m not cutting into the cab on mine. At least not yet. It’s made for a 8” coil over and a 10” bypass. Strokes 16”. Links hang a bit low, and they’re short, but looks like a good kit. Image not mine

 

I forgot about this kit. Thanks. Yeah we aren’t too concerned about stuff hanging low, especially if it’s something beefy like those lower links. Not like we’ll be doing any major rock crawling with only 33’s. That’s what the truck is for. She just wants to be able to go fast.

 

I know a guy near Pismo who has this kit and it’s awesome.

 

Could also go with wicked creations cantilever kit my buddy has it on his truck and it pulls 15” I think

 

You got pricing on this kit if you don’t mind me asking?