1st Gen Lunchtable Thread - General Discussion

I get it now, I just need to wobble my eyes at the same frequency it vibrates on the road and ill see ALL the angles!

 

True. I was just googling her. She turned 39 in February and still looks the same as she did back in the early 2000s.

 

Wow that's amazing! I was only able to get an 18% when my credit score was 584











But it wasn't an auto loan cause I was buying a 20 year old truck that didn't run

 

@Speedytech7
@drr
@Digiratus
@Blackdawg

Scangauge or Ultragauge?

My primary usage would be for Transmission temps.

 

*Quietly laughs in 800 score

 

Changing vacuum lines and trying to chase why I'm burning so rich and I stumbled across this.



Note to self: when your swapping a motor and have never done it before .. and you think you double checked everything. Double check everything all over again

 

Welp it appears my front end is fucked in some kind of way, shop can't get my camber even side to side. Right side they can get to 0 but they can't get the left any better than -.5, which explains my right hand pull.

Now to figure this shit out, preferably before I order new tires

 

Cam tabs bent?

 

Yeah. Mine have about 215k on them. I put grease in them every so often but the boots are torn. I just don't want any issues. I don't really ride my truck hard though.

Ah good to know. Might as well just pony up and get some aftermarket ones then.

 

You keep your 800.


For a man that spent his youth intentionally destroying his credit cause i was positive I'd either die or the world would end, before i needed it... i was really happy 2 years ago when the bank said I was at 584.


When I say intentionally I mean my score was so low, I'm certain they created a lower bracket just to put me in it. I drug myself across that 380 line and then quit checking lol

 

Maybe, I'll have to crawl under it later when I'm not at work and preferably when it's not 105˚ outside. Although I do remember looking at them not that long ago and they looked fine, I've had this pull going on for awhile.

The shop said nothing was glaringly obvious but I can bring it back in next week if I want them to look into it more. If it were the cam tabs I would think they'd have spotted that

 

Ultragauge

 

Hmm I wonder if my SPCs got knocked a little out of whack camber wise on that side, maybe I'll loosen them and see if they have any room to go more positive on camber.

 

Yeah, I want to get an Ultraguage for the 4runner. I liked the Scanguage in the Tacoma but the Ultraguage just seems nicer. Scanguage needs to update their shit.

 

@esxcli this was the picture I forgot to attach, to the post you liked... i woulda never known otherwise lol

 

Hey guys..


I should be able to take a 9v battery and put it to this and hear it click right? And then be able to blow air through one hose and it'll come out the other?


Or do I need 12 volts?

 

I sent Durobumps a message on their site about buying some products for the 100 series. I don't know if they are a vendor on here. @Timmah! might know.

The 100 series owners have figured out that bump stops for 2003+ 4RUNNER, 2007+ FJ CRUISER also work for lifted suspensions.

 

I roll with the scangauge, works fine for trans temps with the X-gauge code. Also is surprisingly accurate for timing and AFR with the stock narrowband gauge, and is useful for short term and long term fuel trims.

 

9v should work from what I've read here, but never tried it myself. And yeah that sounds like the way it should operate

 

I must just have a 9v on the way out I guess. Pulled it from my DMM (which works) but my test wasn't working. Hoped that was my issue but I doubted it since I wasn't throwing an EGR code.

Just hooked it up to my car battery and it operates as it should