What Have You Done To Your 2nd Gen Tacoma Today?

Kmc beadlocks and Atturo 35s

 

Those wheels are fuckin’ beautiful! I hope the Atturo’s treat you well. I’ve read of balancing issues with them

 

Thanks- I may give that extractor a try....

 

Yeah man! Airbags and water intrusion are not on my list of things to do. The glue finally died out in the coastal heat and I could hear it thwap around on I-95. It's especially noticable since installing all the Noico!
Hopefully this will work for a few more years.

 

New stock mudflaps for my 2010. Ones that came on it had been cut short by previous owner.

 

finally got rid of my front end passenger side creaking noise, on a suggestion from a different thread sprayed Silicone spray directly between the coil spring rubber isolator and the frame coil mount and have zero creaking, a miracle after years of trying to trace it down

 

Top of softness

 

Thanks, I have the same exact tires on the truck now but in 20" size. I love them. I'm downsizing to the 17" so I can air down and tackle some decent obstacles

 

It took me 45 minutes to empty my cab of my tools. That's what I did to my beloved workhouse today. This thing is filthy. It needs a bath badly. It's so freakin hot here... holy....

 

did you put two layers of closed cell foam on the floor?

 

No. Just one between the dynamat and the MLV.

 

Rog. Thanks.

 

Just finished putting the Ranch Hand on the front of my 2014 TRD Sport. The most off-road that I do are forest service roads to access the backcountry for hunting and fishing, so I like the way it turned out.

 

Looks nice man, welcome to the forum!

 

yup. 2 packs. 2.25in. Good luck!

 

Got the Noco Boost GB40 in today. Hopefully won’t have to use it but trying to get together a solid recovery and VEDC kit.

Got some OEM smoked headlights in yesterday. Just waiting for the bulbs to come in to do the install and replace the shitty spyder knockoffs the guy had in before me.

 

Professional mechanics use NOCO to jump-start dead cars to bring in for diagnosis and repair because it holds charge and works every time
good choice

 

might be a little cheezy but you could rattle can paint the trucks OEM color on the cap to match it up

 

That looks badass! I can't wait to get my KMC's on. I assume the tire shop had a wonderful time trying to get them balanced. I bought some balancing beads to throw in the tire but I hear good and bad things about them. I'll probably just get mine road force balanced. I also noticed you left the center caps off. I'm not too crazy about the center cap design. I might cut them down and tig weld them.

 

I’ve used my NOCO several times on my truck and other vehicles. It’s a game changer. So damn much easier than jumper cables and begging some one for a jump. Whichever model I got can jump my truck three or four times on a charge. It’s a nice back up to have as you start adding Electrical accessories to your truck. I’ve since upgraded my battery and not used it much. So the truck is to remember to check it’s charge periodically.