Dasaita Head Unit for 2nd Gen Tacoma

@Hippiglass most of those wires you have there need to go. This is what your OEM wire harnesses kinda looked like before your friend (with all due respect) edward scissorhands got in there and tried to wire up Frankenstein lol take a look at the OEM wiring versus yours.





Like @DG92071 said and suggested, the last guy had everything wired up to a amplifier(s). You'll have to clean up his work and wire the OEM wires back together. It will be some work. I'm still trying to find a solid wiring guide. Stand by on that.

 

You can't upload videos here. You can upload to your YouTube then post the link

 

GD, looking at that wiring nest makes my head hurt . It has to be a bad connection or short somewhere.

 

Edward Scisssorhands...fuck

 

Lol I'm not trying to put down the last owner of his truck but damn. I'm really curious what they were thinking?

Did you get that bezel all painted and reinstalled?

 

It's painted, just letting it dry over night. I might post pics tomorrow in the sunlight, unless it looks like shit

I'm still waiting for my replacement harness on the slow boat from China. Any longer and I will probably just mickey-mouse the existing harness.

 

thanks for the stock wiring pictures! lol ya idk what the dude i sold it to was thinking.. he should of just gave the truck back to me with the amps and subs lol.. but im guessing he got some front and rear speaker wires crossed up or some wires where they arnt supposed to be.. gonna expose a little more of the harness so i can see the wires better and figure out what goes where..

 

@Hippiglass I found these:

Not sure if it is JBL or non JBL. It's for 2013


There's this thread:
https://www.tacomaworld.com/threads/2012-wiring-harness-diagram.261506/

I was also told you can use http://www.axxessinterface.com to find any auto wiring diagram. Never used it. Worth a shot.

Hope this helps

 

Anybody get their oem AUX port to work??i might have missed something during install ....

 

Looking at the wiring harness, there isn't a connector that matches the original AUX port connector. I'm going to have to search and see if they make a 8-pin adapter

 

Yea.. =/

 

That's a project for another day. I'm trying to figure out how to get the reverse camera to work on the screen.

 

Let me know when you figure it out

 

So I believe I found all of the necessary wires, I'm just waiting for Amazon to deliver my T-splices.

In the mean time, this is the OEM/Stock connector for the AUX port. 8-pin connector.



Looking at the Dasaita wiring harness, there are RCA connectors for AUX In. So the question is, is there a female 8-pin connector/adapter to RCA wire?

 

If you get the canbus for the rear view camera do you still need the 6 to 12 volt adapter as noted earlier in this thread? Question specifically pertains to 2014 Tacoma.

 

No you do not. I bought that first until it was clear the can bus is all you need.

 

Thanks!!!

 

What's this?

 

That's the CANBUS controller box