What Have You Done To Your 3rd Gen Today?

hauled the LS7 to the shop. I have a spare that will be built up... just don't know what to put it in.

 

Thanks. I'm very lucky to have the time, and a little money to do this. Thanks again.
Zim

 

Thank you! FYI I spent almost a decade in Kingsland, Ga. I needed some snow so I moved north. Thanks again.
Zim

 

I have discover an improved throttle response. The sound increase doesn't occur until after 3000 rpm and it sounds cool.

 

10 years ago i bought a dog in St. Marys. Sweetest most docile dog ever.

 

Has anyone experienced any problems camping in a raw fiberglass cap opposed to a carpeted one? For example condensation, staying warm.. anything like that?

 

They are the best. I’ve got a 14 week yellow wearing out my 5yr old yellow.

 

KTJO Door Bowl Lighting..... EDIT to fix my dyslexia

 

Anyone with ATH bed stiffeners? I'm priming mine and noticed the welds are a bit different in the lower support corners. Waiting for a response from Morgan but just curious if it matters. Posted both stiffeners for comparison.

 

Well said

 

It uses a very strong magnet. It would take something like an airbag strike to dislodge it

 

same thing for me (2 screws) and done

 

Looks like QC was not good that day, that is a crappy(missing) weld.

 

Top picture looks to have less weld penetration. How does it look on the outside?

 

Morgan already emailed me back and said that’s normal. He only welds the outside and zaps the inside corners. Seems weird to me, but I’m no welder.

 

Looks great on the outside. Guess he only welds the outside. Just wanted to be sure that’s ok structurally before I committed to the install but I guess it’s all good!

 

That's a terrible looking weld. I would not be happy with this at all.

 

That's a doll baby right there now. Thanks again Sir.
Zim

 

Installed a Plano rifle case for recovery gear and some tools on my KB Voodoo crossbars bars. I can easily slide the case to the edge of the bars, while still giving me plenty of room to put my Tepui rooftop tent on the bars and still being fairly centered. The roof rack I’m using for the recovery boards, kayak mount, and awning.

Anyway, just a month and a half away from my 2 week road trip to AZ, UT, and CO.

For anyone interested in what I used to mount:

1/4” carriage bolts

1/4” fender washer

1/4” wing nut

RTV

1/4” drill bit

 

Haha, I'm married to a girl from BR, so there is no compromise. I have cousins that went to Ole Miss who have to put up with my shenanigans at family events that get to the point where they just walk the other way now.....