starter removal on 2010 tacoma toyoto sr5 prerunner

how to remove stater on 2010 toyoto tacoma prerunner sr5 v/6

 

Have not done it

Located the following hope it helps


https://www.youtube.com/watch?v=MYmlLKz_yoA

 

A plug connector a cable and two mounting bolts.... Easy at least on a PreRunner with no front differential.

 

Toyota could of did a better job in design making removal/install easier.

 

A PreRunner 4 banger is a piece of cake! 10 minutes out 10 minutes in.

 

you have to removed through left wheel well. not easy at all on 2010 prerunner.

 

don't think so, I have a 4x4 and never had to remove the wheel well. It's not the easiest on a 4x4 but on a prerunner it's quite simple. Couple wobble sockets and extensions and you're good.

 

do not remove the wheel well,work through the wheel well to get the starter out

 

Is your thread a question or a statement? Now you’re giving advice on how to accomplish?

 

just saying you don't removed the wheel well you work through it. the thing is how do you get the stater out through the wheel well

 

See folks, this is why using complete sentences and proper punctuation matters.

 

I just did my starter like a month ago but I'm 4wd I went through the driver wheel well. It wasn't hard at all.