Volk racing TE 37 on my tacoma

thanks, now i remember that post. Any idea or know where to find the actual measurement?

I have the XTs now but debating if its worth the extra work to fit -20 on the truck.

 

What do you mean by actual measurement, like the BS?

 

lip/dish difference from the outer wheel edge to the face.

 

Yankee boy Basin

 

That I do not know, @ShowstoppersUSA might be able to answer that for you. But If I had to do some quick calculations, i would say that lip to face on:
et0: 4"
-20: 4.78"
I could be wrong though as that will probably be the measurements from the rear lip of the wheel to the mating surface

All I can provide you with now is this:

 

te tuesday

 

I thought I had the measurements, I'll see if my home computer has it saved on icloud note's.
The next set of -20's that come in - I can measure it.

 

The -20 does have a bit more poke.

As long as you have a cab mount chop, and are fine with plastic trimming (within liner and lower portion of flare on the cab side) - you will fit a -20 with a 33" mud terrain.

 

Getting anxious to put these on.
Hopefully by next weekend.

 

Mag Blue looking good!

 

Did you get those from showstoppers?

 

I didn’t. I Ordered them from icbmotorsport.

 

What size tire are you going to be running?

 

More than likely some 275/70/18. There’s another guy with the same amount of lift and wheel specs in this thread that used that size and it looks pretty good.
Now, if I can get a shop to let me try a bigger tire would be great cause I’d like to go bigger just not sure it’ll fit.

 

Need a SOLUTION!!

So a month or two ago my brother cleaned my wheels with some wheel cleaners, and after I got home and washed the truck a few days later, I notice some dusty grey coat on my rims, tried washing it the reg way I always do, but would not come off. Now per wash it seem like it’s getting worse and worse, when dry. The things is when wet it maintained the bronze as normal, but once dry it turn dusty grey.

With that said, I wondering if that “wheel cleaner” damage the clear coat, or did it cast additional coat with made it like this(highly doubt). But I couldn’t find any answers anywhere online so thought I ask y’all bet on TE.

Thanks.

 

Try peanut butter, the oil in it will help.

 

The bronze turns dull / dry looking with some wheel cleaners , the shitty part it I’ve had a few sets it happened to and nothing fixed it

 

You need an iron remover.

 

I used iron x and it did nothing to the faded spot