50+ thread

Morning all

 

Andy

RJ

 

Anther fine morning. It still looks like this outside.



I was checking the sprinklers last night and where there was a wet spot I dug down to find this.



It was till over 100 degrees and I was sweating so I stopped for the night. I thought I would work on it this morning but the smoke is so heavy
from the fires it's a no go for now. It's the line for that planter anyway so it's just giving that tree a little more water. Of course it's a 90 right at the wall
so I'm going to have to dig under it a little to be able to cut the PVC and replace that section of pipe.

 

Nope. My honesty in my work is beyond reproach.
FOR NOW

 

FlexSeal!!!

RJ

 

This too shall pass with age!!

RJ

 

Good Morning

Another day of smoke filled skies and extremely hot temps

These new all weather heavy duty flags from Annin look awesome

I have alot of Military Veterans in my neighborhood who also display the US flag and branch of Military flags , It is so awesome to see !!!!

 

@TK-422

Did you see this ??? , Cal Fire's incidents map of California ....... 30 active fires this agency is responding to Currently

https://www.fire.ca.gov/incidents/

 

I was looking at it a few days ago. That's a lot of fires to deal with at once.

 

I do not think that is fair. 242 is ok and @Tacoma Mike wouldn’t use something that is just ok.... Mike would be a 271 kinda guy....
Just saying...

 

I think Mike uses 648

 

I found it today. he wiped it out mid day and the ones that were out and about were flying around the hole today. I hit the hole and them with wasp spray

 

A good point. we use alot of types at work. different ones for bolt size and wicking or retaining.

 

Just got a Severe T storm warning , looked outside towards the East and the clouds look nasty and dark

 

Its ok, I see Shazam is there to protect you.

 

pffft
Stud and bearing mount...

 

Weld

 

got most of the root out.

Its the complicated tooth with 3 roots a 4 nerves that branch out, so he will let the small ones dissolve and finish up in about 10 days.

Young guy very nice. I actually fell asleep in in chair during the procedure.

Went to work until the local anesthetic wore off. Came home and slept for 3 hours.