Alabama thread!

Hey don't be judging, I might not have any money.


I didn't notice it either,

 

Hell yea that’s awesome, and no issues in 200k miles out of um? I ordered bushings for my uca that’s my next suspension redo, still tracing a mysterious pop.

 

Sup David

Sup Brian

Sup Jeff

Sup Caleb

Sup Brandon

Sup Mike

 

My son is still driving on them, no leaks, no nothing. The truck does ride a little rough over the bumps, but the shocks are still solid. Newer 5100s will make a drastic change in the ride. No more truck modding until Fall!

 

You seem to always ask me that question at beer time

 

I'm not even gonna lie. If I ever lift a vehicle again, I'll probably take it to a shop. I'm just not happy with my truck right now. At least if a shop did it, I could take it back and let them deal with it. I just don't have the knowledge/skill to trouble shoot things like this.

 

I'm a creature of habit

 

How’s hump day Phil?

Yea that’ll be a solid ride improvement, do you got aftermarket uca on your 2nd gen? How come no more truck mods?

I’ve kinda been in that same boat, but around here there’s nobody with the knowledge to do it right so I had to learn. You can too, all your problem is more than likely is some worn u joints or carrier bearing and when you lifted it it threw already worn stuff way out of wack which made vibes.

 

Sitting here with the pup pup! Sup with you?

 

It's my "Friday"

The CB should be here tomorrow and I just ordered 3 u-joints a few minutes ago. I'm not to the point of wanting to get rid of the truck, just frustrated It just makes it worse that I went all over Moab without one problem...….spend money and then this happens

 

Sitting at work, spending monies

 

Or I may just be drinking too much

 

It's only too much if you have meetings This coming from a non-drinker

 

Lol your truck will be fine Phil. I promise. I’m sure the CB drop will fix it

 

Monster

 

The sound just really freaks me out. It makes me think I'm just causing a lot more damage.

 

Yea when I bought my truck it had a cheap spacer lift and vibes so I had to fix from the get go, my ome cb drop didn’t do anything for me. I ended up buying some 1.5” cb drop from some guy that built them on here, you need to get a magnetic angle finder and read this https://www.tacomaworld.com/threads/drive-shaft-vibrations-solved-step-by-step.244535/
You may need axle shims.

 

I drink one or two beers a day lol

 

Yup no problem. Probably less than 6k miles actually - only 1 "trip" down to beach and back. Rest had been local and 4 or 5 offroad rides. Happy with my change to dobinsons but I will say the rear is stiff af right now.

 

I'll have to read up on it. All of this is new to me.

We've got some that come in drinking a handle or a case a day