vF Tuner for the 3.5L Tacoma

Thanks for testing this out. I think I’ll still wait till we get the 2.0F installed before I do the update. I’m using the ‘metered connection’ dodge to hold off on the biggie update as long as possible.

 

Hahaha! That is a smart idea.

It was a loooong-ass update on my tuning computer also. Of course, anything taking that long worries me.

 

So if we want to increase throttle sensitivity, would we increase both the "throttle management-throttle limit-accelerator angle" values AND "Accelerator-Acceleration throttle request to airload" values too?

Just trying to get an idea of how it all pieces together. Thanks!

 

You can directly increase throttle sensitivity by altering those 2D tables and *nothing else*

 

Thanks bud! Made the adjustments and currently alternator is pumping out 14.6 volts. Will continue to monitor over the next couple of days. For what it matters I’m running 04b04 33 reg 5.29 even though I have 4.88s installed and i am VERY HAPPY with the shift points/ throttle sensitivity.

 

Is there any way to adjust the standard cruise control map in VFT currently?

The truck drives pretty great for me otherwise. The CC is no good on any kind of hill as it is very aggressive with downshifts as compared to my foot.

What are the VFT options available for us around CC?

@Rafael@OVTune @OVTune

 

My pleasure! What did you set them at? I rechecked my voltage this morning with an OBD reader and the Torque app and voltage is reading only 14.3. I'm wondering if that has anything to do with having a 130amp alternator (with a tow package) and I'd have to raise the numbers higher to get to 14.4. Do you have the tow package?

 

I changed everything to exactly what you posted. I’ll be honest I’m hesitant to change anything else, I don’t know what any of this stuff means and I’m afraid to grenade something. Hahaha! I do have the factory tow package but I’ve read a couple conflicting things about 130 amp alternators or not.

 

I have the tow package, 04B04. I followed these settings that old-school posted, except instead of 96 I put 95, and I'm at 14.6.

 

And I put 94 which is 14.4-5.

it appears in general
96 -> 14.7
95 -> 14.6
94 -> 14.5

and so on

 

When I put 96 I was at 14.8-14.9......which was a little too high for me. Now it bounces up to 14.7 occasionally, but mostly stays at 14.6.

 

not able to get into
set base duty to edit ECT set to 96 30
can you help

 

Just double click on the cell you want to change

 

Hey guys I’m confused on what is actually available in the tune packs right now. I’m looking for the exact file I am running now:

04B04 2.0 91 octane for 4.88’s in the 31-33” tire file. Raphael responded to my zen desk email, but my question wasn’t answered. Is only the stock config a available?

 

Same 2.0 base maps that are available from the OVTuned website download link for the p5f versions. Just in editable vF format

 

Thanks. I’ll take that as a yes?

 

??? Mat posted on the original tune thread that 2.0 tunes for VFTuner in 04b04 were available but you had to request them (non performance tunes). ??? Did you find a download link or request from zendesk? Asking for a friend.

 

Just got them. Thank you.
I’m squared away. Now if I could get VF tuner to work that would be great.

Thoughts @OVTune ?

 

@SpeySquatch

so you got them from zendesk or download link? looking for same. ?? No help here on VFTuner - next step is to do as you are.

 

You asked if only the stock config was available.

2.0 maps are not stock config. So no...

Are you alright?