MARYLAND TACOMAS

Mickey Thompson is owned by Cooper and they’re American made in Utah and Ohio.

Dad has always said, “Peace of mind is worth ever penny I ever spent.”




That being said, i’ve never once purchased a tire warranty. But i also plug my own tires.

 

Nice, they definitely look a lot different on the 4R and Tacos than they do on the Subaru. I like all the sipes on them. She drives from her house over 30 minutes to her job and that typically late at night (bar manager). Thanks!

 

Good luck! FWIW, you can get the cv out without taking the hub nut off. Might be a lot easier having an extra hand while your doing it. I only removed the 2 nuts at the bottom of the knuckle and supported the hub assembly with a jack stand. Just don’t pull that assy too far without the cv out or it’ll pull the inner part of the cv out some from the base...

 

When you're our age that will change.

 

I buy the warranty as well. When I used to go into the office daily if was worth the piece of mind. The office is near the Philly airport.

 

Yea, I mean, more and more tire places just don't want to be responsible for anything anymore. It sux.

 

Near Annapolis, but will drive to borrow. Not a rush, just want to tune some antennas soonly.

 

I’m in Crofton, Rob is about an hour away

 

Got the back done tonight. Going to do the front along with the ecgs bushing tomorrow with the help of @AR15xAR10

 

Nice choice in wheels. Mine are the 3.5 bs'ing.

 

No, I'm waiting for this 12ga sxs to come back in stock. It will be a good porch gun up here at the cabin in case any unwanted guest wander down my driveway.

 

Have one. Can recommend

 

My buddy up here let me shoot his. I always loved the way sxs double barrels looked, very intimidating.

 

If you get tired of yours and you wanna sell...

 

Its an awesome coach gun for cheap

you’ll come to find out, i dont sell guns lol. I only absorb them

 

Did you have to trim anything? Also what did you do for your rear hubs? Did you paint it or just let it build up surface rust?

 

Same here, guns & tools are two things I never sell.

 

No trimming but I'm lifted. I painted the rear hubs back in 2012 when I built this truck.

 

So f*cking fed up with Cali-raised products & condensation. This will probably be about the 7th product I’ve had to “replace” through them. Except now I have to drop the bumper to replace this one. (Before it was pod lights in their fog kit that would fail). Haven’t even had this light bar for 6 months yet..

Just going to put a S8 in there and be done with it.

 

Morning Maryland chilly night last night . Summer is almost over