Alignment recommendations

Looking for alignment recommendations. I have a 2020, Bilstein 5100 with OME 888's with an Icon progressive 3 Leaf AAL. I also have SPC UCAs set in the D position riding on Method 305's with 285 70/17 Toyo AT III's. The place that installed my lift didn't do a great job as some corrections had to be made. Truck drives fine and no issues. I think there is a little more + camber than I'd like. However I have a slight rub on the front driver side (on the inside rear bottom of the plastic fender flare), only when hitting a bump at almost full lock (like pulling into my driveway). I'm think some caster adjustments would help, but wondering if moving to the E position on the SPC UCAs would be the better option. I'm going to take it in for an alignment but I'd like to give the shop some ballpark settings so hey don't just go with stock. My feeling is stock settings would not correct the problem. Thanks for any recommendations.

 

You have your print out from alignment? Pictures would be cool

 

No, the shop that did the lift didn't provide one.

 

Shit what about front shot of truck to see camber

 

Not sure if this helps...