What Have You Done To Your 2nd Gen Tacoma Today?

Where's the fwd burnout vid?

About how much heavier does this feel compared to stock?

 

That's good. I meant in hand how much heavier because you said he was using more beef to make it.

 

how much was the new drive shaft??? did the old use to thud at stops???

 

well i when trail ridin with it in Croom

 

haha holy shit

 

I did the Fog Lights anytime Mod using the no splice method. I trimmed a blade connetor such that it fit tight in the back side of the ignition (green) wire at the back of the connector.

I also modified a garage door remote such that the two leads were soldered to the contacts of the switch. Touching the two wires together activates the remote. Most posts on this forum attached these two leads to a switch in one of the empty switch slots. I liked another method that I saw a referenced here and also on some motorcycle forums that tied into the high beams.

To make it work, I picked up a 12V relay. The two wires from the remote go to the switch of the relay. The other two leads are wired to the white wire of my driver's side headlight and the other one is to the inboard wire (high beam). I soldered the wires at the back of the headlight connector then replaced the plastic back plate of the connector. The remote and relay are in a ziplock bag and stuffed between the battery and wheel well.

To activate the remote, I simply flick the high beams (pull lever towards me and release). This can be done with or without keys in ignition. Lights do not have to be on. Wellah, the garage door opens.

Rod

 

Replaced the air filter with an Amsoil filter.

 

I put a deer in the back of it

 

Nice!!! Pics?

 

I installed seat covers, center arm rest and wished I bought swiches

 

haaa. I would.... Butttt it wasn't quite big enough for pics. Just a spike, last day of season so i couldnt pass it up when it was about 200 feet away from the truck.

 

Hey its better than nothing...meat is meat

 

Yep for sure! It's just not a bragging rights type of buck

 

lol Nice... This is pretty badass.

 

Installed my OME 3" lift. The passenger side fender was a real PITA. It was kinda funny how little the front end dropped when I put the tires back on. Today is the diff drop and AAL, then off for an alignment. The WT mats are in the mail, and I will be done with the mods on this one.

 

installed cabin air filter today and then flashlight holder/charger

 

alarm w keyless and power door lock actuators .... anyone in the northern sf bay area check these guys out!

Audio To Go
1021 Mason St, Ste 1,
Vacaville, CA 95688




(707) 455-1323

 

Nice Flashlight, I got the Hp model in my truck