What Have You Done To Your 3rd Gen Today?

Nice ! Link for the water port?

 

The system my wife's car uses tracks the key fob. It has to be in the car before it will shift out of park. It even tracks you to the door you are going to open, so only that door unlocks by touch. I like the features, just not the car.

 

I got it from Costco, but you can get it from several different places. Definitely the best price at Costco, though, from what I've found.

https://www.costco.com/waterport-da...ed-water-system-bundle.product.100491652.html

 

A buddy of mine had one up in Big Bear this past weekend and I was sold!

 

Thank you!

 

How did you attach it to the bed rails?

 

changed out the bed side decals to a matte black. Thx again Rich at TVD Decals.
Before ( wasn't feeling the red outline and the clear portion on the oem) After

 

New JCA UCAs — just put these after work today. Love the red.

 

Also ordered new rims--- fuck the 25mm offset on the stock rims. Too much RUB --- see the tire black on the UCA in the photos above..... From pulling out of my driveway, once... @Texoma



(4) BR6 Matte Dark Bronze / 16x8 4.00" BS 6x13 -12 offset

 

Nice - those will help the alignment with the spacers. Bet the ride is way better.

 

Better so far except I literally just went down my street and back. Will probably wait to align--- I'll get that done after I get my tires swapped. Will probably sell my stock tires... They were used for almost exactly 1000 miles. Also-- when the 6112s are on it will ride wayyyyyy better

 

So many things I haven't posted but just put in powertray. Not done because beer
Dammit beer.

 

You are welcome. That decal was from the subwoofer that I installed a few weeks ago. Like you I was looking for a spot for that JL decal. Post a pic of yours if you don't mind. Cheers!

 

Got rid of a little more chrome today

 

Question, I have a light bar at the lower grill like you do, is it necessary to relocate the control box in order for it to fit, thanks

 

Nice touch on the centre caps.

 

Picked up and installed a 2nd hand Pelfreybilt (don't hate) Aluminum front bumper and wondering if anyone is running a light bar other than the 30inch BD S8 that it was designed for?

 

@Zingbot - I had tried a few locations w velcro and even considered drilling but ultimately none looked quite right...I ended up caving and getting the blend mount which is pricey but really good quality. I read lots of success using the 2 tape measure clips but didn’t want to drill into the scanguage...very happy w the way the wire routed (tied down in a pillar and under dash —30min install https://www.google.com/amp/s/blendm...monitor-mount-kit-for-scangaugeii-scangauged/

 

Prepping to fit 295/70r17

 

How do you like that head unit so far?