Scan gauge 2 transmission temperature

Trying to install transmission temperature codes on the scan gauge 2 for my 2016 Tacoma 2.7 cannot get codes to work had no issues with my 2020 3.5 any help would be much appreciated thanks

 

There is a certain firmware rev that allows those codes to be added. Yours may have the older firmware.

edit- you can have them upgrade the firmware for $25.

 

It’s the 4.3 version

 

Are these the codes you are using? They worked for me.

 

Those I used on my 2020 3.5 and they work great my 2016 with the 2.7 I cannot get codes to work I was using the 2008 present cansf codes

 

For the 2016 should I be using the same one for my 2020 3.5

 

Mine is the 6.2 version

 

Email SG; they respond pretty quickly and would probably be best to guide you. Or you can do trial/error method with generic CANSF or 3.5l ones. At least you can't screw anything up with the trial/error method.

 

They have been really helpful for me