Bilstein 6112 notch settings

Im trying to get 2.5 in lift with my 6112s. Have the 600lbs springs. Not gonna add a bumper anytime soon. Also have a 2.25in strut spacer at my disposal. What notch should i set to get my lift? 5/4?what happens if i set it at 6/5?

 

Stiff riding! HAHAH I'm on 6/5 with the stock Bilstein coils

 

Here is a chart

And a thread
https://www.tacomaworld.com/threads/6112-what-clip-setting-on-3rd-gen-for-2.558154/

 

Stock bilstein coils are the 600lbs right? How stiff compared to stock. I have a sr5 long bed 4x4

 

Thanks for the info.. looking into it now. Would you recommend though keeping in at a low notch and using the 2.25in spacer?

 

Yes 600lb comes with the 6112, Unless you wanna upgrade. Compare to my OEM suspension for (OR) You feel everything HAHAHA!!

 

I would not go any higher than the 2 clip personally. I know there are others that will say it's fine though. In my view, if you need to go any higher on clip settings, you should just get 650 or 700 springs.
To answer your question though, yes I would put it on 0 and put the puck in.

 

Haha om good to know its going to be an improvement. Cuz my stock shocks arent even the 4600s like your OR has..lol

 

Yea that makes more sense and you would benefit from the extra strength from the coil. Thanks for making my decision come to a conclusion. Might just do 2/1 on the notches with the "puck"( funny name) and get close to 3in. right?

 

But... $40k truck think about it

 

But what if run extended bumps and UCA meant for extended travel? I mean isn’t it the same concept as std travel vs ext travel coil overs? Serious question btw.

 

This out of my experience HAHAA! I"m just saying don't go cheap. Don't want yall to get stuck out in the wilddddd

 

Cheap works fine for those that don't go wildddddd.
For those that do, it just gets expensive to break big boy toys.

 

Thats hella bad.. but im doing the 6112s. I think they can manage a lil bit better than 4600s right?

 

Lol. Don't worry unless you are jumping your truck or trying to be a desert runner at 40mph
Here is a 2nd gen up the street from me.... on pucks and blocks.

 

WE JUMPING!!! once the raptor lights are on!!!!

 

Probably the 6112 are super thick compare to the skinny 4600s

 

We hit 88mph, you are going to see some shit Marty

 

They are this thick. So i think they can take it.lol not trying to jump just overlanding a little.

 

recommend you install the lift yourself! Its a great learning experience!! Took me 2 days to install my lift HAHAHAAH!!! 6112/5160 with a OME Med leaf pack. Also torque spec!!

Just do it right the first time! then later in the future GO BIG! BIG BUCKS!!!