Massimo Fridge???

stupid question but is your bluetooth on?

 

On the phone, yup of course and so is location

 

not too sure then sorry. I tried to help.

 

Thanks, I am clueless myself at this point.
I don't even care about the feature, just wanted to see if it could.

 

Anyone know which fridge slide is compatible with the 52q

 

This one might work... need to measure bottom of the fridge and see what the dimensions are.
https://ironman4x4america.com/fridg...MI8cqQ5vXt6wIVEj6tBh0M4gyCEAQYAyABEgKJYfD_BwE

 

thanks but fridge don’t really have any attachments for a tie down.

 

The handles on the sides??
https://ironman4x4america.com/fridg...MIyLyOpoDu6wIVkh6tBh0HigyjEAQYBCABEgL2Q_D_BwE

 

This is probably the first down side I've seen to these fridges. Looks like none of them have handles you can use to strap them down. But I'm sure there's a solution.

 

Yeap handles are no good for a tie down

 

Ok. Something can be figured out. Give it a minute and we'll think of something.

 

Bluetooth not working for me either. I can see the Bluetooth icon, but it’s not lit up. iPhone doesn’t detect it in the Bluetooth setting and neither can the app.

 

I called massimo and they stated that some fridges will come with the Bluetooth on and if yours didn’t then yours doesn’t have the option pretty much.

 

Lol

 

Looking like Home Depot has them too and for a good price. $289 for the 42q and $299 for 52q.

https://www.homedepot.com/p/Massimo...-pip_alternatives-_-311637273-_-311638139-_-N

 

Ok. Mounting it to a bed slide via handles like other models is out.
We like to mod, right?
So mods it is....
I took the rolling handle off, 4 machine screws about 1 inch long. The screws go in about 1/2 inch.
Putting 2 small d-rings on the handle side should be easy enough. The front, well who is willing to drill a pilot hole in the shell????

 

would drilling a hole in the shell affect its insulation value? I know it does on some coolers.

what if you also use the existing bolt holes higher up where the compressor is.

 

That's the 64k$$$ question.

 

what about using the existing holes above where the compressor is. if you get a some sort of nylon strap and put some holes in it with grommets you could probably crate your own handle there and use that to strap it down somehow.