1st Gen Lunchtable Thread - General Discussion

I thought a Dremel but was worried about taking too much meat off the already thin sleeve.. i kinda thought if I used sandpaper to take the edge off I'd be okay

 

You're awesome, thank you

 

Use steel stick just so it doesn't take soo long to cure

 

Use grinding bits to just get enough of it thin to where you could lightly "chisel" it with a brass drift.

10 Pcs 1/8 Shank Abrasive Mounted Stone Rotary Tool Grinding Wheels Bit Set for Dremel

https://www.amazon.com/Abrasive-Mou...ds=dremel+grinder+bits&qid=1600469281&sr=8-18



@Abeyancer are you cutting the red "sleeve" out? If you don't need it and only need the green tube smooth for the new bushing, use the grinding bits down the orange dotted line where you already cut. Then you get the inner (red) sleeve paper thin along the orange line so as to not nick the outer green sleeve and whack it with a drift.

 

Looks great! How much into it did you end up at after all the work? I'm sure it's still ridiculously cheap.

 

$2100 for a 2009 with remote start and shit too.

 

Mo powah!

Only $78k

 

I'd pay another $78k to put a manual in it for no reason other than it's fun to drive with two feet when one of them isn't on the brake.

 

My buddy had one of the first Hellcat Challengers that came in, in manual, and that transmission just didn't mate well with the motor.

Came from the Viper that's tied to an 8.4 V10

Anyway, going with a manual is actually cheaper.

 

Bummer - respect Dodge for putting buck wild hp out in factory vehicles.

Viper now we're talking - saw a GTS coupe circa 1998 on a family trip to SC. No one had stuff like that in the cold and lonely state I lived in. Blew my frikin' mind. Never plan on buying one ever, still that or a similar era convertible with a removable hardtop would be the ridiculously overpowered dream for me for sure.

 

Applied for a scholarship from the Society of Petroleum Engineers as an Environmental Engineer.


Feels wrong

 

Come to the dark - there is power. Literally. Power.

 

Opened the last trailer on the property. I see one thing of value. All the boxes are full of ceramics possibly vintage

 

I said the environment and oil and gas industry are gonna have to fuck eventually, might as well have more people with experience in the industry referee

 

This property seems like a mixture of Storage wars and Pickers

 

Cheap POS hound dawger DC Tacoma @Blackdawg
@Empty_Lord

 

Awesome, well done!

 

Except for the red interior (never liked red interiors in cars), that is the only Hellcat I would want. The widebody. It's setup more for handling on a racetrack with curves.

 

Ceramic stuff