What Have You Done To Your 3rd Gen Today?

I also have the front end done in voodoo blue to match as well

 

More cutting to fit 35s... almost there... started adding BD lights

 

D ring mounted license plate bracket after getting warned for not having it on my aftermarket center bumper

 

We got a new Chamberlain opener and I had the option of a keychain style opener. I love it, and I feel more secure not having it in the truck in case of a break-in, no garage access.

 

BOO! UK! JK!

Hotty Toddy! (But I do like that blue)

 

Added new wheels and tires on Thursday, TRD pro 17” 265/70 r17 and Changed out the chrome bumper with black end caps. Almost don’t with the mods

 

Looks awesome! Can never be done with mods though.

 

I installed some new speakers in the front doors today. Rockford Fosgate The Punch Model 1692 6x9. I didn' take any pics, but just in case you're doing this, reuse the existing Toyota speaker frame to install these. Strip out all the old speaker guts, and wires, cut out all the "supporting crossmembers" leave the yellow foam ring and use the remaining frame to mount the new speakers too. You will need to drill four small holes on the edge on the plastic speaker frame to drive the mounting screws at a slight angle it works fine, and no chance of puncturing the new speaker. Keeps the speaker magnet away from the window in the down position, and lots of room behind the door panel. Reinstall using the factory 10 mm bolts. The new sound beats the factory set up by a mile.



I used these wiring harnesses from Amazon for a plug and play experience.

$18 (2) Pair of Metra 72-8104 Speaker Wire Adapters for Select Toyota Vehicles - 4 Total Adapters

https://www.amazon.ca/gp/product/B01GEIP7RW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

In the back doors I installed the Rockford Fosgate 6.5"round speakers with the same set of wiring harnesses. Super easy install, same thing, reuse the factory speaker frames as a mounting bracket for the new ones. About an hour each set to install. Way better sound for under $500 .

Next will be the tweeters and maybe a sub woofer and amp.

 

Same. Red one's are en route should have them Monday.

 

I did exactly that 2 weeks after I brought the truck home except I installed Infinity all around. Recently I put some self adhesive sound deadening foam around the speaker on the door panel and it has improved bass response considerably.

 

I sound deadend and insulated the whole truck, floors, doors, back panel, about a month after I got it. Only have the headliner left to do.

 

Great minds think alike.

 

Well - it looks like my Truck... except yours is a TRD Pro... Same thing - SR5 with Yakima rack and Pinshu soon. Added Demon Brackets and red D-Rings with the AlphaRex LED Alpha Black headlights.

 

Where did you get that mount?

 

2015-2020 Toyota Tacoma 4PCS Anti-dust Seat Bracket for Fixing Bolts Cover (Trims Accessories)

$20 JSTOTRIM Fit for 2016-2023 Toyota Tacoma 4PCS Anti-dust Seat Bracket Fixing Bolts Cover Trims Accessories

https://www.amazon.com/gp/product/B07W1P11RL

One of my biggest grips is the metal feet of seats in my Toyota's - they are ugly as hell. So - I had these on my Prius - so picked up some for my new Tacoma!

Passenger Side (manual adjust chair) Before and After


Drivers side (10-way Power Adjustable). Before and After.
Only thing I had to do was cut the curve off at the end and sand it flat and it fit like a glove.

 

I use Aluminum Anti-Seize - and then usually use a q-tip to smear it on the threads on the inside. Works like a charm every time.

 

here you go
Hooke Road License Plate...

$33 Hooke Road Shackle D Ring License Plate Mount Bracket Relocation Holder w/White LED Light for 1955-2025 Jeep Wrangler CJ YJ TJ JK JL Gladiator JT

https://www.amazon.com/dp/B07VYYNM38?ref=ppx_pop_mob_ap_share

 

Finally swapped over the factory tires to KO2s.

Over the past 6 weeks; upgraded to the black Pro Wheels, Morimoto headlights, and pro grille.

 

@Beaver18 I’ve been planning this mod for a while. Just curious— some Amazon reviews talk about quality issues (stopped working, adhesive issues w “sticker” etc). Is this still going strong for you (and do you still like it?). Also— amazon says not compatible w 2020 Tacoma but I’m guessing that may just mean a harness adapter may be necessary. Was this plug and play for you? Sorry for all the questions at once and thx! Looks great!

 

Pics or it never happened.