Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

don't lollygag. bite the bullet and get it. shit changes, life happens, access to parts isn't forever. We hope they are around for the ages, but find a way to make it happen. Tomorrow is not guaranteed.

 

You're forgetting one thing. It's hunting season up here in North Idaho. After that's all done I'll get more serious about getting parts.

 

Thanks for the fenders @Evenflow !

 

Looks good! What size tires are those?

 

37x12.5

 

Can the lower arm pivots be adjusted for alignment more than once? Or are they a “set-and-forget” system?

 

No you can readjust as needed but it isn't as straight forward a process as adjusting the cam bolts. You'll have to unbolt the LCA and move the spacers around.

 

#alltheajustments (up to 1.5")

 

1/4"-1" forward

 

LCA kit is 0-1” forward and LT kit gives you another 7/8”

 

sorry, I was referring to the cam bolts. I ask because the website says that you can drill through and set the cams, not sure if you we’re talking about the same thing. I might just be really confused, sorry.

I can’t keep an alignment to save my life which is the most appealing thing for me about this kit. If I drill through and later on went LT, would I would just re-drill?

• Once the truck is aligned there are holes in the tops of the cams that can be match drilled into the lower arm tabs allowing you to bolt the cams in place thus eliminating the ability to knock the truck out of alignment.

 

d'oh..missed the 2. ty.

 

wait ... extra 7/8? with LT....*doing maths*
hmm....37s?

 

I’m not allowing that!

 

Yes you would re drill if necessary.

 

Ahhh, ok, ok I see now. Thank you!

 

Someone correct me if I’m wrong but my current skids can fit on top of the LCA kit? Or will this replace my front skid and I need to adapt my mid skid and transfer case skid to fit?

 

Yes you'd need to adapt the mid skid/transmission skid to work with this. Also there is no upswept part on this skid for the front so if you wanted to keep that then you'd have to adapt that as well.

 

What skids do you have, ive adapted some other companies skids to the kit and some are really easy to do so

 

@kasnerd isnt playing around