1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: DIY Bookshelves Thinking about buying a cordless 3/4" impact wrench Woodworkers - Dewalt 8.25" vs 10" jobsite table saw Plumbing issue achieved. What gremlin cut my pipe? Getting heavy tires back on truck in garage Recommend an electric impact wrench

Any woodworkers?

Discussion in 'Garage / Workshop' started by Forster46, Mar 31, 2013.

Page 307 of 739
  1. Sep 19, 2020 at 2:03 PM
    #6121
    six5crèéd

    #6121
    six5crèéd Be the light

    Joined:
    Jul 9, 2019
    Member:
    #298734
    Messages:
    35,610
    Gender:
    Male
    First Name:
    Bruce, or Crèéd, neither is correct.
    Southern Virginia
    Vehicle:
    8 lugs no plugs
    I have a piece of hickory at work, I’ll see if I can get her one done by next Friday :thumbsup:
     
    six5crèéd, Sep 19, 2020
    #6121
    wilcam47[QUOTED] likes this.
  2. Sep 20, 2020 at 3:40 PM
    #6122
    98tacoma27

    #6122
    98tacoma27 is going full "SANDWICH" Moderator

    Joined:
    Dec 18, 2008
    Member:
    #11714
    Messages:
    67,858
    Gender:
    Male
    First Name:
    Ben
    Not Beech Creek
    Vehicle:
    05 Tundra SR5 (+295k AND COUNTING), 2006 F350 King Ranch 6.0L
    Some stuff. Not a lot, just some.
    98tacoma27, Sep 20, 2020
    #6122
    Whitebutler[QUOTED] and wilcam47[QUOTED] like this.
  3. Sep 20, 2020 at 6:51 PM
    #6123
    loginfailed

    #6123
    loginfailed Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195923
    Messages:
    5,156
    Gender:
    Male
    First Name:
    Dwayne
    Houston, TX
    Vehicle:
    2014 DCSB 4WD
    I needed a desk. I cheated and bought an 8 foot birch butcher block. So not technically “woodworking”. Stained it ebony and applied a few coats of satin poly. After a ton of sanding and polishing I got the finish to where I wanted it.

    The butcher block is 1.75” thick and I used some 3/4” black iron pipe for the legs. It came out super strong and weighs about 120 lbs.

    The legs probably look a little funky being off to one side, but I did that intentionally to fit additional chair at the end.

    E2DCD9A2-D9E8-405F-B3E4-9D1687B6EB40.jpg 91947175-50D8-4929-A2BF-E083DF64FCC4.jpg 58D7EC74-5661-4689-9F30-6285EAED635B.jpg
     
    loginfailed, Sep 20, 2020
    #6123
    Fargo Taco, CXYyuppie, TK-422 and 8 others like this.
  4. Sep 21, 2020 at 7:19 AM
    #6124
    RedTacoATX

    #6124
    RedTacoATX Well-Known Member

    Joined:
    Jul 21, 2018
    Member:
    #260039
    Messages:
    753
    Gender:
    Male
    First Name:
    Bryan
    Austin, TX
    Vehicle:
    Black 2016 Tacoma TRD skeeewp DCSB & 1992 DLX RC V6 4X4 MT 35's FTW
    None....yet.
    One of the new cases I made for a buddy. Broke a lens on my phone so, sorry the pic sucks...

    20200918_173224.jpg
     
    RedTacoATX, Sep 21, 2020
    #6124
    EPBlueTaco, TK-422 and six5crèéd like this.
  5. Sep 21, 2020 at 7:22 AM
    #6125
    six5crèéd

    #6125
    six5crèéd Be the light

    Joined:
    Jul 9, 2019
    Member:
    #298734
    Messages:
    35,610
    Gender:
    Male
    First Name:
    Bruce, or Crèéd, neither is correct.
    Southern Virginia
    Vehicle:
    8 lugs no plugs
    six5crèéd, Sep 21, 2020
    #6125
    CXYyuppie, 23Skidoo, TK-422 and 1 other person like this.
  6. Sep 21, 2020 at 7:31 AM
    #6126
    wilcam47

    #6126
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Nice what bits you use?
     
    wilcam47, Sep 21, 2020
    #6126
    six5crèéd[QUOTED] likes this.
  7. Sep 21, 2020 at 7:34 AM
    #6127
    six5crèéd

    #6127
    six5crèéd Be the light

    Joined:
    Jul 9, 2019
    Member:
    #298734
    Messages:
    35,610
    Gender:
    Male
    First Name:
    Bruce, or Crèéd, neither is correct.
    Southern Virginia
    Vehicle:
    8 lugs no plugs
    3/8" end mill for metal :anonymous:

    Did a circle pocket on the CNC milling machine.
     
    six5crèéd, Sep 21, 2020
    #6127
    wilcam47[QUOTED] likes this.
  8. Sep 21, 2020 at 7:42 AM
    #6128
    wilcam47

    #6128
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    [​IMG]
     
    wilcam47, Sep 21, 2020
    #6128
    six5crèéd[QUOTED] likes this.
  9. Sep 21, 2020 at 6:42 PM
    #6129
    wilcam47

    #6129
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Rough shaped

    20200921_152812.jpg
    20200921_152854.jpg
     
    wilcam47, Sep 21, 2020
    #6129
    six5crèéd likes this.
  10. Sep 22, 2020 at 12:49 PM
    #6130
    wilcam47

    #6130
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Smoothed out now

    20200922_123952.jpg
     
    wilcam47, Sep 22, 2020
    #6130
    CXYyuppie, loginfailed and Kolunatic like this.
  11. Sep 22, 2020 at 1:13 PM
    #6131
    98tacoma27

    #6131
    98tacoma27 is going full "SANDWICH" Moderator

    Joined:
    Dec 18, 2008
    Member:
    #11714
    Messages:
    67,858
    Gender:
    Male
    First Name:
    Ben
    Not Beech Creek
    Vehicle:
    05 Tundra SR5 (+295k AND COUNTING), 2006 F350 King Ranch 6.0L
    Some stuff. Not a lot, just some.
    Smooth is right. Are these bottle openers?
     
    98tacoma27, Sep 22, 2020
    #6131
    wilcam47[QUOTED] likes this.
  12. Sep 22, 2020 at 1:14 PM
    #6132
    Kolunatic

    #6132
    Kolunatic Broke ass

    Joined:
    Apr 29, 2012
    Member:
    #77862
    Messages:
    46,732
    Gender:
    Male
    First Name:
    Kevin
    Texas
    Vehicle:
    07 DC peerunner
    :popcorn:
     
    Kolunatic, Sep 22, 2020
    #6132
    wilcam47[QUOTED] and 98tacoma27[QUOTED] like this.
  13. Sep 22, 2020 at 1:45 PM
    #6133
    wilcam47

    #6133
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Yes sir, .going to torch half of them, maybe stain the others.
     
    wilcam47, Sep 22, 2020
    #6133
    98tacoma27[QUOTED] likes this.
  14. Sep 22, 2020 at 4:23 PM
    #6134
    wilcam47

    #6134
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Stained and torched...20200922_161507.jpg
     
    wilcam47, Sep 22, 2020
    #6134
    CXYyuppie, six5crèéd, 98tacoma27 and 3 others like this.
  15. Sep 22, 2020 at 8:59 PM
    #6135
    wilcam47

    #6135
    wilcam47 Keep on keeping on!

    Joined:
    Jan 27, 2016
    Member:
    #176243
    Messages:
    54,391
    Gender:
    Male
    First Name:
    Will
    Bourbon state
    Dutch oven lid puller

    20200922_204638.jpg
     
    wilcam47, Sep 22, 2020
    #6135
    CXYyuppie, six5crèéd, 98tacoma27 and 1 other person like this.
  16. Sep 23, 2020 at 12:25 PM
    #6136
    96BlueTacos

    #6136
    96BlueTacos トヨダ

    Joined:
    Jul 5, 2017
    Member:
    #223188
    Messages:
    1,137
    Gender:
    Male
    First Name:
    Mikey
    Earth, 3rd planet from the Sun (CO)
    Vehicle:
    1996 Single Cab Taco Manual 4x4 3.4L V6 370k /1985 4Runner 4x4 22RE 200k /2001 Double Cab Taco Auto 4x4 Supercharged 3.4L V6 180k
    1996-JBA upper control arms, replaceable Cardan joint drive shaft, leveling kit, camper shell, trailer hitch... 2001- TRD Supercharged, TRD headers...
    Timber framer here, just finished up this structural truss today66C1F95C-5A37-41C4-ADEB-B7C82F277DDB.jpg59032D0C-4C7E-4FEA-BF38-DBA50C55D39E.jpg The king post is one piece and is housed in that scissor-lap joint. A ridge beam will go over the top of this truss and will be notched to fit.

    This was yesterday, it’s was raising day, we cut all the joints and timbers by hand in shop and deliver to site. no CNC. All pegs, no metal other than the timberlocks to hold the rafters in their housings and the post brackets in the concrete.:thumbsup:F7CB1474-105D-479D-A841-E62C4D7C00A7.jpg5BD355E3-8C56-44E5-8597-6CA285454F17.jpg 7E493F8A-1A6F-43D8-B336-60EBA0E715D8.jpg49546ED3-8B95-408B-9E9A-B4E62483C0E3.jpg
     
    96BlueTacos, Sep 23, 2020
    #6136
    Whitebutler, Scott B., Fargo Taco and 14 others like this.
  17. Sep 23, 2020 at 12:28 PM
    #6137
    98tacoma27

    #6137
    98tacoma27 is going full "SANDWICH" Moderator

    Joined:
    Dec 18, 2008
    Member:
    #11714
    Messages:
    67,858
    Gender:
    Male
    First Name:
    Ben
    Not Beech Creek
    Vehicle:
    05 Tundra SR5 (+295k AND COUNTING), 2006 F350 King Ranch 6.0L
    Some stuff. Not a lot, just some.
    Love it. I love timber frame work; especially the old school stuff.
     
    98tacoma27, Sep 23, 2020
    #6137
    Fargo Taco, wilcam47, 96BlueTacos[QUOTED] and 1 other person like this.
  18. Sep 23, 2020 at 2:27 PM
    #6138
    RedTacoATX

    #6138
    RedTacoATX Well-Known Member

    Joined:
    Jul 21, 2018
    Member:
    #260039
    Messages:
    753
    Gender:
    Male
    First Name:
    Bryan
    Austin, TX
    Vehicle:
    Black 2016 Tacoma TRD skeeewp DCSB & 1992 DLX RC V6 4X4 MT 35's FTW
    None....yet.
    I've been wringing my hands and doing a mad scientist laugh since I got home.

    20200923_162037.jpg
    20200923_161958.jpg
     
    RedTacoATX, Sep 23, 2020
    #6138
    Championsumo, wilcam47, 96BlueTacos and 2 others like this.
  19. Sep 23, 2020 at 2:41 PM
    #6139
    truchador

    #6139
    truchador Well-Known Member

    Joined:
    Aug 29, 2015
    Member:
    #162943
    Messages:
    3,493
    Gender:
    Male
    First Name:
    Otto
    WV
    Vehicle:
    15 DC OR
    weathertech, seat covers, scratches
    Nice figure :)
    Is that walnut and (Birdseye) maple?
     
    truchador, Sep 23, 2020
    #6139
    wilcam47, RedTacoATX[QUOTED] and 98tacoma27 like this.
  20. Sep 23, 2020 at 2:43 PM
    #6140
    truchador

    #6140
    truchador Well-Known Member

    Joined:
    Aug 29, 2015
    Member:
    #162943
    Messages:
    3,493
    Gender:
    Male
    First Name:
    Otto
    WV
    Vehicle:
    15 DC OR
    weathertech, seat covers, scratches
    That’s awesome
    How much to ship one to 26270


    But 24’ by 48’ :bananadead:
     
    truchador, Sep 23, 2020
    #6140
    wilcam47 and CXYyuppie like this.
Page 307 of 739

Products Discussed in

Groz 01012 Steel Square Set, 3 Piece
$64.83
SuedePaper 25 sheets (8.5 x 11)- the Original Luxurious Velvet Paper (Antelope)
$37.22
Musbeat Guitar Stand, Acoustic Guitar Stand Floor, Black Walnut Wood Guitar Stand, Single Guitar Holder Stand for Electric Guitar, Banjo, Mandolin, Hanging Guitar Stands for Home Decor Studio Display
$69.98
Grizzly Industrial G0858-8" x 76" Parallelogram Jointer with Helical Cutterhead & Mobile Base
$2,799.00
MaxWorks 80855 500-lb Utility Service PP Cart With Two Trays and Wheels 40" x 17" Overall Dimensions
$84.99
Whiteside Router Bits 2306 Chamfer Bit with 45-Degree 1-1/16" Cutting Length
$49.09
Cleveland Street Novelties 45" Christmas Deluxe Leg Lamp, Multicolor
$249.99
Whiteside Model UDC9112 Spiral Combination 1/2" SH X 7/8" D X 1-1/8"CL
$172.50
QWORK Aluminum T Track, 2 Pack 12" Universal Double Cut Profile T Track, with Predrilled Mounting Holes and Screws, Woodworking and Fixtures, for Drill Press Table, Router Table
$7.47
General Finishes Wood Bowl Finish, 1 Pint
$32.95
DEWALT Router TrackSaw Guide Adapter (DWS5031) , Black
$91.99
Abrasive Cleaning Stick Sandpaper Cleaner | Remove Dust and Debris from Sanding Belts & Discs | Small Natural Rubber Cleaning Block for Woodworking | 8" X 1-1/2" X 1-1/2" (Small)
$7.93
Sanyipace Sewer Camera Self-Leveling 165FT/50M, Drain Pipe Inspection Camera Built-in 512Hz Transmitter, Meter Counter, with Microphone Speaker DVR Recorder, 16GB TF Card, Guide Wheel (5mm Cable)
$1,399.99
143 14PCS Contour Sanding Pads Dura Block Sanding Blocks Profile Sanding Blocks, Sanding Block Rubber Sandpaper Mat Flexible Contour Polishing Pad Woodworking Tools
$26.40
Bosch PR20EVSK-RT Colt Palm Grip 5.7 Amp 1-Horsepower Fixed Base Variable Speed Router with Edge Guide (Renewed)
$94.95
400 Pcs M3/M3.5/M4 Wood Screws, Torx Head Pan Head Self Tapping Screws, Stainless Steel Flat Head Drywall Screws Assortment Kit for Wood, with 3 Pcs Bits (400 Silver)
$11.99
KEENTECH Router Bits, 1/2" Shank, Bottom Cleaning Router Bit, Carbide Tipped Surfacing Bit, CNC Spoilboard Bit, Slab Flattening Industrial Cutting Tools, Woodworking, Planing, 3/8" Dia., 3/4" Depth
$16.98
iGaging 35-0928 Digital Table Saw Gauge
$64.80
Downcut Spiral Flush Trim Router Bit, 1/4" Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4" Shank Down-Cut)
$21.99
CNC Spoilboard Surfacing Router Bits, 1/4" Shank 1" Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK (Carbide)
$16.97
CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2" Shank 2" Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool
$12.99
DEWALT Biscuit Joiner, 6.5 Amp, 10000 RPM, Retractable 45 Degree Notch, For Depth Spots (DW682K)
$203.71
BOSCH GET65-5N 5 In. Dual-Mode Random Orbit Sander
$319.00
POWERTEC Dust Collector Fittings, Router Table Dust Collection System w/Y Fittings Hoses, Reducer Shop Vac Works w/BOSCH PR20EVS, Makita & Porter Cable, Not Compatible with Lift Router Tables (70331)
$49.99
SUNLFPROD Upgrade Featherboard Safety Device Stackable Feather board for Most Standard 3/4", 3/8" Miter Slots, Miter Track, T-Slots, T-Track on Table saws, Router Tables & Band Saw
$19.18
The Hedgehog Featherboard for Table Saws for Quicker, Easier, and Safer Workflow | Improve your accuracy and precision
$34.99
BOSCH GEX33-5N 5 In. Multi-Hole Random Orbit Sander/Polisher
$149.00
DMT W6EFC Deluxe Diamond Knife Sharpening Kit with Hard Wood Box, Set of 3 Diamond Sharpening Stones, 6"
$110.82
Ultrawall Wall Mount Wood Organizer and Lumber Storage Metal Rack with 3-Level - Indoor & Outdoor Use, 2 Pack
$35.99
LaserPecker LP1 Pro Laser Engraver for Beginners, Mini Diode Wood Leather Felt Laser Engraver Portable Small Laser Engraving Machine, Suit Set with Laser Safety Glasses + Auto-focus Stand
$569.00
Stander Wonder Tray, Adjustable Swivel Table, Large Laptop Stand, Couch Desk, Side Tables & Gaming Bench, TV-Trays for Eating on Couches, Chairs, Recliners, Black
$132.99
Wixey WR700 1500mm/ 60" Digital Saw Fence Readout
$139.99
3M 35519 2-3/4" x 5" Rubber Sanding Block , Red
$25.70
Makita XNB01Z 18V LXT Lithium-Ion Cordless 2" Brad Nailer
$240.48
Spare Hardware Parts Cam Lock Fastener Screw (Replacement for IKEA Part #118331) (Pack of 8)
$9.99
Essential Joinery: The Fundamental Techniques Every Woodworker Should Know
$17.98
Moxon Vise Hardware Kit with 2 each 8" x 3/4-10 Threaded Rods, 2 each 4-1/2" Cast Knobs and 4 each 3/4" Nuts and Washers
$47.99
DEWALT Double Bevel Sliding Miter Saw, 12", Compound (DWS780)
$649.00
Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles
$29.97
Handplane Essentials, Revised & Expanded
$45.00
Forrest WW10407125 Woodworker II 10" 40 Tooth ATB .125 Kerf Saw Blade with 5/8" Arbor
$172.99
FULTON Corporation 400SHB Steel Sawhorse Bracket, 2 Pack (Total 4 Count)
$22.80
To Top