AZ Classifieds

Gun broker has dpms for around $1K. Dont know what your budget is

 

As of now both straps are spoken for. If something changes I will repost these.

 

Whatcha thinking for prices of floor jacks?

 

Anyone looking for 2nd gen long bedsides and preface lift fenders? Went fiberglass and need to try and recoup some costs of this Prerunner build that's piling up.

700 for both bedsides, with flares and bedrail caps.

250 for both fenders with flares.

Open the trades for high quality race seats (Momo, Sparco, ETC) or wheels and tires for desert racing.

 

BUMP for remainder!!!

 

Anyone looking/wanting a Tacoma spare tire? Free.99. I honestly don’t know if the tire is even good but it’s the original spare. I bought the truck in April of 2015

going to be in Tucson Monday-Wednesday if anyone down there wants it

 

Anyone selling some 16s that have 4.50” BS and 0 OS?

I don’t care about their condition, as long as a tire will hold air. Need 4.

 

FJ rims will have the 4.5 BS FYI and O. Tacoma rims won't. I run FJ rims with my mid-travel lift and aftermarket UCA's. There are some sets on craigslist and facebook for under $200

 

I understand that. I just wanted to ask here first.

The only FJ wheels I could find on CL are 17s

 

To get a 0 offset and a 4.50 back spacing you'd end up with an 8 inch wide wheel. I don't think any OEM wheels come in 8 inch wide. I have some OEM steel wheels I could let go for $40, but they're 7 inches wide, and I think the BS is something like 5.25ish.

 

I sourced one! Thank you sir

 

I don’t want stock/OEM wheels! I want to have my current wheels powder coated and need a set of wheels to run in the mean time. I’m running 295/75/16

 

If you just need a temporary solution I'll lend you mine with a $40 deposit. Bring the back unbent for a full refund.

 

Yours won’t work. Thanks tho.

 

Toyota FJ cruiser 16” original wheels for sale. 16”x7” alloy - 5 total.
Phoenix, AZ · ·
$125

Off of a 2010 Toyota FJ. 4 with caps, one spare without. A few scratches but no major scars or gouges. My FJ wheels are only 7.5 rim, I'm not sure if any came with 8" rim

 

7-7.5” was the width on them. Do you think I’d rub with these wheels? I have 295/75/16s and mid travel suspension.

 

I have run 285/75/16 without even being close to the UCA, I have a cab chop also. I run pizza cutters now 255/85/16 which are 33.5" and I rub the top fender liner and back fender liner (which I have cut most of it away now). But no rubbing on the UCA and it wasn't even close. I have the Camberg 1.25" ball UCA's on a 2nd gen 2012. i think you should be good depending on the tire manufacture. the thinner rim will pinch the tire up versus wider rim might intrude more towards the UCA. The other option is I saw some 1.25" spidertrax spacers .. i'm not a fan but would work in a pinch with some cheap taco rims.

I had my 5 FJ rims powder coated and it took 3 weeks, luckily I hadn't installed the lift yet so I was able to use my TRD 16" factory taco rims while waiting for Powder coat. they should also offer you a spray can of the same color for painting the center caps and touch ups .. so that's worth buying when you get it done.

 

Looking for a few spare steel wheels if anyone replaces theirs.

 

Nooooo
I’m collecting them all. I need 3 more. Ha!

 

i have a stock 2015 spare I’ll be removing from my truck once I get back in town