What Have You Done To Your 3rd Gen Today?

Qi charger pad plugged in.


Scotch double sided tape to secure the Qi charger pad and modified hole to allow for USB cord to the bottom of the center console.


Red rubber mat on top to hide the Qi charger mat (a bit of scotch double-sided tape to hold it in place as well)

 

Yes you will need to trim the edges.

 

Good night all! I’m exhausted and heading to bed. But I did finish making a plug and play harness for the kicker powered sub:

 

I just went through this myself. I do have one bit of advice for people looking to do this if they’re wanting to drill through the molding. Every review and video that I saw recommended a spade bit to drill through. I had a much better results from a Forstner bit. I tried both ways and the spade bit left jagged edges. The Forstner bit made a smooth hole and was easy to control the depth. You still have to cut the metal out on the backside though

 

Good instructions and don't even have a Prinsu rack to install.
Has anyone used this type of drill bit before. I like them for drilling plastic especially.

 

Idk but it purrs

 

Well I'll be damned! Just set it up. Didn't think it worked in Canada but it does! Easier to set it up using a computer as opposed to doing it on the Google Assistant app. Will only work with a current Remote Connect subscription. Used this info to do it:

https://support.google.com/assistant/thread/53889026?hl=en

 

Entune has Alexa. I'm not sure it can do that though! But I haven't tried either.

 

Ordered the 4runner Pro style wheels for $627 OTD from Rise Auto Parts https://www.riseautoparts.com/produ...t-4runner-fj-cruiser-tacoma-fortuner-wheels-1

 

Are these oem or replica?

 

Replica

 

Just did the same, $788 shipped for oem ones through toyotaparts4u.

 

replica

 

Replica. They are actually 8" wide instead of 7" that the OEM are.

 

I see

 

I plan on running a 285/70/17 and some people complain about it only being a 7" wide wheel. Figure these will do the trick for a little less. We'll see!

 

That's a good price for replicas

 

Yeah I went back and fourth. It will probably be a couple years before I go bigger then 265/70r17. At least that’s what I’m telling myself.

 

Looks great! I’m looking to buy one as well, do you notice the loss of visibility in the rear much?

 

I did the same thing. Then I looked at the 285/70/17 thread and I couldn't hold back. Installed a 3/2 lift and just went for it. Buy once, cry once.