What Have You Done To Your 3rd Gen Today?

Maybe your not fat enough!

 

If you can do light bars and garage door opener, you can do the raptor lights to switch. Just use the same setup that you used for your light bar switch. It’s just a switch and relay to send power to the lights with a push of a button. Cheap too.
A set up like this-
MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

$11 MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

https://www.amazon.com/dp/B00O72R7Z8/ref=cm_sw_r_cp_api_fab_3wpBFbP37STQC

 

Installed Clazzio's black with dark grey leather insert and red stitching. The dark grey matches up well with the grey door panels. I'll revisit tightening them up further after they break in a bit.

 

im going to eventually do this down the road. they look great

 

Yeah, pretty small dude, always been! Great for getting lost in a crowd or past security at a concert!

 

Lotsa info here...
https://www.tacomaworld.com/threads/the-prinsu-how-to-thread.412679/

Also check youtube for install videos. I suggest you watch several different ones.
Really, its pretty easy!

 

Washed and waxed today. I installed my new wheel covers today too. I'm really happy with how they look!

Two of the four installed without a problem, two were more of an issue, so I emailed the company on Ebay and I'll see what the response is. They clip onto the spokes, but I don't want to start f'n around with them to see if I can get them to stay on better until I hear back.

 

Hooked up a buddies Tacoma today on a sub install Just a simple plug and play T-harness.

Sub:
https://www.onlinecarstereo.com/Car...qxdh5KOTuaOPvtD6b_lwmTyPA0NkgLxoCZdwQAvD_BwE#

 

Couple small things:
1) 5,000 mile oil change
2) Removed the front air damper thing ("front spoiler" as Toyota refers to it at as)
3) Replaced the front dash speakers with the Subaru Kicker tweeters -- subtle, but noticeable

 

I did the “Add-a-Fuse” option. Took no longer than 5 mins. I watched this video before hand and it helped a ton.

https://youtu.be/LM-eOlCIwiU

 

What fuse did you use to have them on 24/7? or anytime the truck is on*

 

Love those, just installed mine but for the love of God I cannot get the head rests clipped.

 

I just installed mine just last week. I was going to have a shop install it because I’m not very handy but, I’m so happy I didn’t! I saw a YT video of the install and I called them to cancel the appointment. If I would’ve saw that video after I had paid them to install it, I would’ve been pissed lol. On the plus side, I learned a few things.

I cut my weather strip rather than drill holes into it. I struggled with making the holes with the 3/4 drill bit and it looked like crap. So I just cut the sections.

I used this video along with the Prinsu install guide.

https://prinsudesignstudio.com/download/16508/

https://youtu.be/F7g1rGOQqJU

 

INJ Fuse
The one I circled

 

Meso Customs headlight trim plates

Meso Customs Ultimate 3rd brake light w/ KC Cyclones

Meso Customs Puddle pods w/ switch


- @SpikerEng Hood struts
- KC under hood lighting kit with custom 3d printed brackets by fellow TW member, @tamer.


At the helm bed side reinforments

 

Did you delete the side/360 degree cameras?

 

When I first did my system, I made this same harness... then I realized this part of the harness is not even needed and just add extra bulk to the wiring behind the dash.

 

Made it so everything was even and there wouldn’t be tension anywhere on the factory harness. You can fit a cantaloupe in that dash.

 

Here i was looking at replacing my shifter and forgot I had one from my Charger that I had made. Ordered bottom collar cap today. I'll polish it up some.