What Have You Done To Your 3rd Gen Today?

Haha same here. Keep Oregon Green

 

Amazon all day long - fits like a OEM - get the Tnuts while there

 

I have the same under hood light wish I had the mounts looks great man.

 

Welcome 5TW Neil!

 

This is true, you can fit a lot of stuff back there.

 

There are two kinds of people - those who have forgotten about expensive bikes on the roof, and those that will.
That kept me up at night so I went with the 1 up for the hitch...

 

Swapped 2” blocks for 1.5 icon AAL paired with 5100s and a wheelers u bolt flip

I actually repurposed the stock bump stops. Used a piece of steel and put 2 strips holding it down after I cut the lipped edge off the bump stops. See pics. I got my last package from Headstrong. .5” spacers for the front coilovers. Still a bit lower than I’d like. Also will help with Rub hopefully. The stock rims with these tires only rubber the UCAs prior to switching to these -12 offset scs br6s

Malala I couldn’t find much detail on how to remove the clip. So I’ll Include step by step pictures of how I went about it. You have to remove the clip that holds the stock leaf springs just behind the axle. I used a sawzaw.... a bunch.

Also I learned how heavy those suckers are and that removing them all together and then adding the AAL separate is MUCH easier!

checkout the pictures. I’ll try and do them in order here: (build thread coming soon I promise lol)

 

Your fingers must not hurt enough!

Maybe wait for a hot sunny day to loosen them up a little?
You'll get it because it will bother you until you do. OCD Rules!

 

The headrest clips will cause you to use colorful language. It would be much easier with 2 people, unfortunately I didn't have that luxury.

 

Anybody know where to get these clips... Ugh... I need 3

 

I gotta buy some too! Just busted 3 doing the puddle pods! There is a parts list I’ll grab the number and post it in a few!

 

Did the exact same thing... thank you!

 

Learned your lesson on the passenger side too? Haha I’m looking over the parts list he has on the instructions they ain’t there!!!

 

$8 Rexka 30pcs Door Garnish Moulding Retainer Clip Compatible with Toyota Lexus 67771-58010 Tundra Tacoma Sequoia RAV4 Land Cruiser Highlander C-HR Yaris Scion xD

https://www.amazon.com/gp/product/B07CJLB1BP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Here ya go!

 

Thank you sir!

 

Sorry, had to chuckle a bit. Your like the 1000th Taco owner that has lost those clips inside the door panel.
They are readily available on Amazon. Someone will post the link shortly I'm sure.

 

https://www.tacomaworld.com/threads/3rd-gen-door-panel-removal.685008/#post-24166838

 

this does look great. It might actually look the beat on black. Anyone have one on a white with a hood scoop?

 

20 for $8.49 on eBay
https://www.ebay.com/itm/232531647427

$10.42 on Amazon
Autobahn88 Door and Granish Molding Clip, fits for Toyota (OEM: 67771-58010) (Pack of 20)

$10 Autobahn88 Door and Granish Molding Clip, compatible with Toyota (OEM: 67771-58010) (Pack of 20)

https://www.amazon.com/dp/B01M0UR43W/ref=cm_sw_r_cp_api_fab_L8tBFbCA64HZB