Alabama thread!

Will it scan Chevy transmission temps?

 

What Transmission

 

thanks guys I have the MT but have to assume it’s the same. That takes some worry away.

 

Took my old wheels and put some new street tires on my wife’s 4Runner she said it was badass, then Scotty hooked me up with the Toyota hub patch and bling patch

 

$559 SmittyBilt X2O-10K WATERPROOF SYN - SB98510

https://www.amazon.com/dp/B00K150VAI/ref=cm_sw_r_cp_apa_fab_aDtBFbPDFMJR7

@Khold was in market for winch? Small price drop on this one today

 

Also noticed this leak when I got in my truck today what could be causing that bad window seal?

 

Fun afternoon. Glad I took advantage of having the uppers and lowers out to do the ECGS bushing. Also, great time to swing a hammer a little more at the pinch weld haha.

yes, that’s a recalled harbor freight jack stand haha. It no longer holds anything I need to keep from crushing me. Today it did good holding my light and CV haha.

 

So much room for activities

 

Sup

 

Looks like a heater core to me. There is a gromet in the firewall right there too.

 

Yea it’s not antifreeze, looks like dripping off the fan area, tried looking a min ago checked a grommet by the fender that’s not it but there’s a lot more grommets.

 

Check the drains for the cawl, they are bad about plugging up and causing a leak on the passengers side just like yours

 

https://www.tacomaworld.com/threads/water-leaking-into-cabin.587342/

https://www.tacomaworld.com/threads/cowl-water-leak-and-linkage-seized.604576/

https://www.tacomaworld.com/threads/cleaning-out-cowl-drains.608157/

 

Thanks I may go ahead and grab it at that price.

 

I paid $550...guess I should have waited

 

They make a good winch, I been using one for five years

 

Where are those drains and whats the best way to access do I have to pull that plastic cowl?

 

Did you see the links I post earlier?

 

Yea had good pics of using sealer on that cowl but that was about it, I cleaned out leaves built up in that crack by the door/fender when I was doing my fender trimming.

 

There is drains on each side in front of the door and a rubber drain on the fire wall. When they get partially stopped up it backs up and causes a leak. Get a water hose, run water in the cawl and see where it drains out then clean the drains.