Official* New England Buy/Sell Tacoma Marketplace

And he's proofed out of existence...

 

Being all sneaky like... tell me which version of the rigid side shooters you would get...

 

KC lights 519 led backup light kit. Brand new, not opened. I was going to mount them on the roof rack of my FJ, but never ended up doing so. Don't really want to mount them on my LC. $150 firm price.

Kicker 6"×9" speakers + Metra speaker adapter $80 Firm BNIB

JBL 3.5" speakers, 2 sets of 2 speakers (4 total speakers) $40 each set BNIB

Wheelers FJ Cruiser rear superbumps never used $100.

Will ship, but prices don't include shipping.

Location: East of where the red fern grows, North of the Mason Dixon, South of America's top hat. At the centroid of Westborough, Mitford, Upton, and Ashland.

 

I do...it’s made by Lifetime caps in California, all aluminum. Bought it for my 2018 but I’d doesn’t fit because of the tailgate, should fit 1st and 2nd gens tho. It was used for a 2 month road trip on a second gen before I bought it so it’s pretty much brand new and has been stored inside my garage ever since. Has sliding side windows with screens, $700. If you’re interested let me know and I’ll send you some picks.

 

Just FYI, you're going to want to open that up for pics for BST rules, and a location. Something more specific than the state.

 

Price drop:

 

Bump Price Drop - funds goes to help pay for construction needed at the new house

 

Thanks but coworker is looking for a 3rd gen

 

No worries. Good luck with the search

 

Brand new in box, got em a few years ago and they don't fit on my BAMF bar..bolts are too wide.

Ideally I'd like to trade for something of similar value light wise to use, they are listing for $189 new presently.





If a straight sale, looking to be around the $170 range..pretty firm on that at this time, this saves you $20 plus shipping on purchasing them online.

 

What are you getting to replace these?

 

I went with JBAs HD uppers. I don't need the added strength, but it makes me happy that they can take a lot of abuse! I also wanted to get more caster, as with the Camburgs, I was only able to get 2.6-2.8 degrees, and hopefully with the JBAs, I can get somewhere in the upper 3 degree range.

 

#1 reason why I got rid of the Camburgs was the low caster number with my 3 inch lift. I put the JBA UCA’s on and got about 3.5 caster, plus the caps on the Camburgs seized on from the New England shit weather. To me a very overrated UCA unlike the JBA’s.

 

Thankfully the caps still come off on mine, but there is a bit of rust around were the cap slips on to the ball joint cup.

 

Got any pics of the new HD’s installed

 

I siliconed mine on. Water was getting by the orings, they sent me new caps and I rings and couldn't get them on at all, said f it and sealed them with silicone. One they wear out I'll either put my stock ones back on or a set of JBA

 

Do any of you guys have stock UCAs?

 

I do not sir

 

One on each side of my truck!