What Have You Done To Your 3rd Gen Today?

I walked up to the door and attempted to open with the turned off key fob on me, the door would not unlock as it usually does. I had to actually push the unlock button on the fob.

 

Toyota has only made and sold millions of these. They were called PreRunners...

 

I paid 90 bucks including install but they have an install tutorial on their website. Cheers brotha

 

I need this and a set of train horns! I LOVE sitting at a railroad crossing playing dueling horns with trains!

 

I wanted the dual color but screwed up and ordered the dual brightness......

 

When you do the correct sequence to lock the fob, the red LED on the fob will flash 2 times twice. Just hit any button on the fob to re-activate it.

 

can confirm

 

Removed the Toyota emblem and sr5 getting rid of the 265/70/16 soon

 

To keep anything above your Tacoma's bed headrail from going thru the rear window.

 

That's what I used to mount mine. Rock solid and as good or better than any other farm jack mounts out there and with much less weight than most mounts. Absolutely no bed slap or rattle with these mounts. On a scale of 1 to 10 these are a solid 10!

Post #156304 for pics of my installation using Tractor Supply "Bull Dog" mounts.

 

I think the point is it eliminates the "headache" of having someone put something theyre loading in your truck bed through your rear glass.

 

Check Sparks Parts and use the code ROBMOTIVE, you'll get 5% off.

 

I don't think my 2017 has the provisions for bedlight. I could do the holes but I don't recall seeing the wiring required. Has anyone done this on earlier models?, thanks

 

Thank you.

 

I think this is post 156304

Was it a different post you are referring to, perhaps? Or was it a different thread?

I'd be curious to see your setup.

EDIT: Oh, I'm guessing before you were RivetNutBob you were EastHillBob?

I went ahead and found your original post which automatically updates to your new username when you change it.

Also, this post is the headache rack post, I missed in the first time I skimmed by that because the photos were dark.

 

Domed REAL Carbon Fiber underneath that TRD Red Accent strip would look nice too!

 

So how is the ride now?

 

304 is the correct post and yes I was East Hill Bob. Not sure what this has to do with the head ache rack post that you are referring to. This was in response to @RallySOP 's mention of Tractor Supply Bull Dog mount. Hope that answers your questions Dave.
Just another example of a HiLift mount that's economical, solid and virtually fool proof as far as installation goes well as one that works quite well with a BakFlip MX4.
No rail attachment what so ever and no bed slap.
Brackets mounted using.........wait for it...........



Rivet Nuts.

 

Beautiful RTT with LST. 23 Zero makes a nice product. Do you remove the bed rack when removing the RTT? I have a Diamondback SE on order, does yours interfere with the rack? I also noticed Diamondback is selling cross bars to mount a RTT.

 

Upgrade to low beam output last night

HIKARI Ultra LED Headlight Bulbs... https://www.amazon.com/dp/B077BT6M6Z?ref=ppx_pop_mob_ap_share