1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: 19:55 Minutes of Fame- Why I Love My Tacoma and This Crazy Forum Im adding a blind spot system (it works) Gun & Tactical set up Waterproof wire entry into bed floor Tailgate Gap Cover Solution Using Raspberry Pi for conversion of dumb truck to smart truck

Eibach pro lift kit

Discussion in '3rd Gen. Tacomas (2016-2023)' started by Raw31993, Apr 19, 2018.

Page 190 of 284
  1. Sep 25, 2020 at 9:42 AM
    #3781
    Duke4x4

    #3781
    Duke4x4 Well-Known Member

    Joined:
    May 23, 2020
    Member:
    #328991
    Messages:
    51
    Gender:
    Male
    First Name:
    Duke
    Vehicle:
    Tacoma TRD Offroad 2019
    Im going with the 2nd or top perch on the Eibach lift. Running 285/75/16 with -12 offset wheels. Do I need to get UCA's or will the factory UCA's work? Anyone on the 2nd or top perch with factory UCA's have any spring rub or alignment issues?
     
    Duke4x4, Sep 25, 2020
    #3781
  2. Sep 25, 2020 at 9:49 AM
    #3782
    JonesMGMOR

    #3782
    JonesMGMOR Well-Known Member

    Joined:
    Oct 27, 2018
    Member:
    #270786
    Messages:
    168
    Gender:
    Male
    North Georgia
    Vehicle:
    2018 Tacoma TRD OR
    Prinsu Roof Rack Mictuning Rock Lights 8ct Mictuning 32” light bar Caliraisedled Ditch Lights Caliraisedled TRD Pro Grille Calirqisedled rear Amber pod lights Baja Designs s2 sport pod lights Eibach pro truck lift stage 1 OME Heavy duty leaf springs JBA upper control arms Smittybilt X20. Winch Smittybilt RTT SSO front bumper
    Should be fine in the middle. Don’t know about the top. Just plan on upgrading upper control arms anyway because why not?
    I ran stock for a few months before upgrading to JBA UCAs. Haven’t looked back since. Also they just recently upgraded the boots on these things too. Very nice product.
     
    JonesMGMOR, Sep 25, 2020
    #3782
    CygnusX191 and weagle22 like this.
  3. Sep 25, 2020 at 10:05 AM
    #3783
    Duke4x4

    #3783
    Duke4x4 Well-Known Member

    Joined:
    May 23, 2020
    Member:
    #328991
    Messages:
    51
    Gender:
    Male
    First Name:
    Duke
    Vehicle:
    Tacoma TRD Offroad 2019
    Was there a reason why you switched from factory to JBA?
     
    Duke4x4, Sep 25, 2020
    #3783
  4. Sep 25, 2020 at 10:10 AM
    #3784
    JonesMGMOR

    #3784
    JonesMGMOR Well-Known Member

    Joined:
    Oct 27, 2018
    Member:
    #270786
    Messages:
    168
    Gender:
    Male
    North Georgia
    Vehicle:
    2018 Tacoma TRD OR
    Prinsu Roof Rack Mictuning Rock Lights 8ct Mictuning 32” light bar Caliraisedled Ditch Lights Caliraisedled TRD Pro Grille Calirqisedled rear Amber pod lights Baja Designs s2 sport pod lights Eibach pro truck lift stage 1 OME Heavy duty leaf springs JBA upper control arms Smittybilt X20. Winch Smittybilt RTT SSO front bumper
    It’s better than stock.:cheers:
     
    JonesMGMOR, Sep 25, 2020
    #3784
    CygnusX191 likes this.
  5. Sep 25, 2020 at 10:16 AM
    #3785
    Duke4x4

    #3785
    Duke4x4 Well-Known Member

    Joined:
    May 23, 2020
    Member:
    #328991
    Messages:
    51
    Gender:
    Male
    First Name:
    Duke
    Vehicle:
    Tacoma TRD Offroad 2019
    So what improvements dod you notice with the new ICA's? Also did the factory UCA alignment work with bigger tores?
     
    Duke4x4, Sep 25, 2020
    #3785
  6. Sep 25, 2020 at 10:20 AM
    #3786
    71tattooguy

    #3786
    71tattooguy Well-Known Member

    Joined:
    Dec 19, 2018
    Member:
    #276275
    Messages:
    5,839
    Gender:
    Male
    First Name:
    Dino
    Petaluma , Ca (707)
    Vehicle:
    2019 DCLB TRD OFF- ROAD
    Kings 2.5” front and rears from Accutune / ICON RXT LEAF PACK black badges doors and tailgate / method 315 / 255/85/16 Yokohama G003 / magnaflow exhaust , axle dump / meso int delete kit / meso led map lights / dome lights / wheelers front super bumps / accutune Flip kit with spacer and new bumps / Cali raised fog light pods / Cali raised ditch lights / RCI FULL SKIDS / SLIDERS / RCI rear bumper / rigid backup lights / tuned on 4.88’s
    When going to 285’s upper control arms help with alignment. You can get more caster also. 265’s wouldn’t require uppers with 2” of front lift.
     
    71tattooguy, Sep 25, 2020
    #3786
    CygnusX191 likes this.
  7. Sep 26, 2020 at 4:32 AM
    #3787
    arden82

    #3787
    arden82 Well-Known Member

    Joined:
    Apr 14, 2020
    Member:
    #324721
    Messages:
    81
    Gender:
    Male
    First Name:
    arden
    Vehicle:
    2020 TRD OFFROAD SILVER
    265/75/R16 AT3w, Clazzio Black leather, Bed Lights, 15% tint, Roof Rack, TRD Grill Amber leds, interior leds, spidertrax 1.25 spacers,
    265/75/16 Falkens on Nv 305, 1.25 spacer. Eibach on second clip and icon 1.5 aal. No uppers or any of the other stuff. I may try to put the overload back in, because the front is about 1/4 higher at the moment

    BBAFEBB9-1B95-4AE0-94AE-9E046AF3A74C.jpg
    FFDE41C2-D6A7-4B3C-B8D4-E428FC384B99.jpg
     
    Last edited: Sep 28, 2020
    arden82, Sep 26, 2020
    #3787
    $ilverT@¢ō92, taco kai, RepoMarket and 10 others like this.
  8. Sep 28, 2020 at 10:12 AM
    #3788
    bttrbsch

    #3788
    bttrbsch Well-Known Member

    Joined:
    Jan 19, 2020
    Member:
    #316646
    Messages:
    402
    Gender:
    Male
    First Name:
    Michael
    Bellingham, WA
    Vehicle:
    2018 Inferno Tacoma TRD Off-Road
    Kicker speaker upgrade Rockford Sub TRD Grill Raptor Lights Oedro Running Boards Seat Covers Black Emblems MBRP Exhaust Sound dampened doors Blacked out turn signals Pro comp 7069 wheels BFG KO2 285/70/17 Ram mount Joying Head Unit Fogs Soft topper canopy Fox 2.5 RR DSC Fox 2.0 RR rear HS AAL 1.5" rear plus overload (2" total) Center console divider Axe/Shovel Mount Traction boards 32" light bar Shift sense pro v2 iDrive throttle controller Xentec 35W HIDs Vair 88p air compressor Dome LEDs LED reverse lights + pods JBA Upper Control Arms Full size spare tire Driver seat riser
    I'm on basically the same setup (second clip) with no uppers. What are your alignment numbers?

    I have 1.8 degrees of caster, which makes the truck a little squirrely on the highway. Not a huge deal, but so many people on TW swear you need new UCAs to get higher caster. Maybe a year down the road I'll upgrade, but don't think they are absolutely necessary (also $500+ is sizeable).
     
    bttrbsch, Sep 28, 2020
    #3788
    CygnusX191 and 71tattooguy like this.
  9. Sep 28, 2020 at 2:30 PM
    #3789
    Firedawg12

    #3789
    Firedawg12 Active Member

    Joined:
    Feb 15, 2018
    Member:
    #244481
    Messages:
    25
    Gender:
    Male
    First Name:
    Justin
    South Carolina
    Vehicle:
    2017 Tacoma Sport 4x4 DCSB
    Slimline Steel Bumper from SOSconcepts 20” Fuels wrapped in 33 KO2’s Tri fold tonneau cover Hoping for a susp kit soon
    I’ve had my stage 1 kit on second notch for a couple months with AAL from HS in the rear. Ride is great in comparison to a leveling kit and 2” block in the rear that I had before. Takes bumps really well. And not near as stiff as before. Height is about the same as it was believe it or not. My mechanic that put it on forgot to measure it for me before and after. Great product

    I have a question regarding the overload leaf in the rear. Some say they were able to leave it in. My question is how was this possible? I tow my boat quite a bit to the river and it squats quite a bit in the rear with it out. Any help would be appreciated.
     
    Firedawg12, Sep 28, 2020
    #3789
    betor and CygnusX191 like this.
  10. Sep 28, 2020 at 3:27 PM
    #3790
    MNlaw

    #3790
    MNlaw @Overland_Minnesota

    Joined:
    Oct 12, 2018
    Member:
    #269124
    Messages:
    122
    Gender:
    Male
    Vehicle:
    2019 Quicksand TRD Off-road DCSB

    with the second notch, is that 2.5"?
     
    MNlaw, Sep 28, 2020
    #3790
  11. Sep 28, 2020 at 5:24 PM
    #3791
    arden82

    #3791
    arden82 Well-Known Member

    Joined:
    Apr 14, 2020
    Member:
    #324721
    Messages:
    81
    Gender:
    Male
    First Name:
    arden
    Vehicle:
    2020 TRD OFFROAD SILVER
    265/75/R16 AT3w, Clazzio Black leather, Bed Lights, 15% tint, Roof Rack, TRD Grill Amber leds, interior leds, spidertrax 1.25 spacers,


    I haven’t noticed anything like that. It has handled great.

    492660D5-F765-4B78-8A01-CC4C7D0D0FF1.jpg
     
    arden82, Sep 28, 2020
    #3791
  12. Sep 28, 2020 at 5:27 PM
    #3792
    arden82

    #3792
    arden82 Well-Known Member

    Joined:
    Apr 14, 2020
    Member:
    #324721
    Messages:
    81
    Gender:
    Male
    First Name:
    arden
    Vehicle:
    2020 TRD OFFROAD SILVER
    265/75/R16 AT3w, Clazzio Black leather, Bed Lights, 15% tint, Roof Rack, TRD Grill Amber leds, interior leds, spidertrax 1.25 spacers,
    I’ll have to measure. I haven’t done it since having it aligned
     
    arden82, Sep 28, 2020
    #3792
    CygnusX191 likes this.
  13. Sep 28, 2020 at 7:00 PM
    #3793
    Duke4x4

    #3793
    Duke4x4 Well-Known Member

    Joined:
    May 23, 2020
    Member:
    #328991
    Messages:
    51
    Gender:
    Male
    First Name:
    Duke
    Vehicle:
    Tacoma TRD Offroad 2019
    Ok im going to do the install in two weeks. I really wanted to get the lift to 3 inches to clear the 285/75/16's with a -12 offset wheel. Would you reccomend a 1/2" spacer on the drivers and a 1/4 on the passenger. The other option would be to use the top notch on the eibach shock. Any opinions?
     
    Duke4x4, Sep 28, 2020
    #3793
  14. Sep 28, 2020 at 7:10 PM
    #3794
    OMGitsme

    #3794
    OMGitsme Well-Known Member

    Joined:
    Feb 8, 2019
    Member:
    #282305
    Messages:
    2,402
    Gender:
    Male
    Vehicle:
    Sold
    You can use the top notch but it'll suck for ride and angles. I'd rather do second notch and CMC/heat gun to clear.
     
    OMGitsme, Sep 28, 2020
    #3794
    CygnusX191 likes this.
  15. Sep 29, 2020 at 10:01 AM
    #3795
    ReconMarine

    #3795
    ReconMarine Well-Known Member

    Joined:
    Dec 29, 2018
    Member:
    #277380
    Messages:
    132
    Gender:
    Male
    First Name:
    Ed
    Vehicle:
    2019 White Tacoma TRD Sport
    Just got my kit. Now I need to wait for the JBA and AAL to get here next week so I can start working on it.:muscleflexing:

    IMG_2056.jpg IMG_2055.jpg
     
    ReconMarine, Sep 29, 2020
    #3795
    slvrtaco11, taco kai, CygnusX191 and 2 others like this.
  16. Sep 29, 2020 at 10:56 AM
    #3796
    sbl23

    #3796
    sbl23 Well-Known Member

    Joined:
    May 11, 2018
    Member:
    #253177
    Messages:
    54
    Gender:
    Male
    First Name:
    Bryant
    Minnesota
    Vehicle:
    2020 DCLB TRD OR Black
    When did you order your JBA UCAs?
     
    sbl23, Sep 29, 2020
    #3796
    CygnusX191 likes this.
  17. Sep 29, 2020 at 10:59 AM
    #3797
    ReconMarine

    #3797
    ReconMarine Well-Known Member

    Joined:
    Dec 29, 2018
    Member:
    #277380
    Messages:
    132
    Gender:
    Male
    First Name:
    Ed
    Vehicle:
    2019 White Tacoma TRD Sport
    I ordered them last week. They said they have a 2 week lead time so if all holds true then I should get them next week.
     
    ReconMarine, Sep 29, 2020
    #3797
    CygnusX191 likes this.
  18. Sep 29, 2020 at 11:01 AM
    #3798
    Fernando95diaz

    #3798
    Fernando95diaz Well-Known Member

    Joined:
    Sep 3, 2019
    Member:
    #304094
    Messages:
    178
    Gender:
    Male
    First Name:
    Fernando
    Vehicle:
    2019 Tacoma off road 4x4
    Where did you order this kit from?
     
    Fernando95diaz, Sep 29, 2020
    #3798
    CygnusX191 likes this.
  19. Sep 29, 2020 at 11:05 AM
    #3799
    sbl23

    #3799
    sbl23 Well-Known Member

    Joined:
    May 11, 2018
    Member:
    #253177
    Messages:
    54
    Gender:
    Male
    First Name:
    Bryant
    Minnesota
    Vehicle:
    2020 DCLB TRD OR Black
    Nice - I am expecting mine to ship soon also.
     
    sbl23, Sep 29, 2020
    #3799
    CygnusX191 and ReconMarine[QUOTED] like this.
  20. Sep 30, 2020 at 6:22 AM
    #3800
    strass56_taco

    #3800
    strass56_taco New Member

    Joined:
    Jan 10, 2019
    Member:
    #278799
    Messages:
    3
    Gender:
    Male
    First Name:
    Justin
    Vehicle:
    2016 TRD OR Quicksand
    C4 Lo Pro Bumper DB Customz Grille 1000LB Smittybuilt Winch Martin Roof Rack ARB 2000x2500 Awning Hi-Lift Mounted to roof rack 1.25 Spider Trax Spacers TJM Sliders MBRP Turn-down Exhaust 12v Solution Remote Start RekGen Mudflaps 31 Inch LED light bar
    Nice, I ordered my JBA's on the 22nd and still havent heard anything so hoping their lead times are correct so I can get this installed!
     
    strass56_taco, Sep 30, 2020
    #3800
    CygnusX191 likes this.
Page 190 of 284
To Top