Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

@Evenflow custom +4 kit is coming together

 

And some adjustable shackle flip hangers

 

I need to do this for my 63 swap. Maybe I should just buy the rear hangers/shackles from you guys

 

Could this theoretically work for a 63 swap? spring-over, not under. Bolt-on 63 swap would be a game changer.

 

Spring over your would have to cut and weld on a new spring perch and set pinion angle. Thought about this a couple weeks ago when debating on if I want to do chevy 63s. Still doing research too, I don't know if changing the angle the leaf springs sit would effect it, also need to do more research mounting shocks inside the frame.

 

Yeah, I mean I don’t mind the work for a 63 swap I just don’t know how to weld. I follow you on IG, you get some pretty crazy flex with the shackle flip. You’re on stock leafs too right!?

 

add a fabbed spindle and I’m in!

 

There really is no point after the spindle and double shear are welded on. The custom spindle only makes sense if you go vertical uniball and then the taco hub still the weak point.

 

Yeah stock leafs, haven't needed to upgrade till now. I'm getting some axle wrap and am trying avoid a traction bar. Still weighing the pros and cons of each setup so I'm not sure what I'll do.

 

FIFY

 

See now I'd be interested in this as a little more width and travel over the current one. I'm assuming it's pushed forward like your other one or maybe done a little differently?

 

Pushed forward 7/8” just like the 2.25” kit

 

You think you'd make this an option?

 

The 4” over kit?

 

That’s what I had meant tbh. A spindle with vertical uniball and stronger hub. Something similar to solos kit but having all the little details @81Trekker is designing into his kits.

 

So being in my current state of big dreams and no budget i can only ask questions and plan. You have mentioned that the tacoma unit bearing will be the weak point on a fabbed spindle, would a full floating dana 60 hub/spindle set up work or are you running into bolt pattern issues? I have also noticed you mention Dana 44 hubs and spindles. what is the strongest set up of the three provided your already headed down the path of a fabricated spindle?

 

Chevy D44 big bearing snouts as the Chevy stuff is all 6x5.5 lug pattern

 

Yes

 

I’m making two 4+ kits, one for @Evenflow and the other is up for grabs