Need help with a part number.

So a while ago I was totally paying attention to my surroundings and a car appeared immediately in front of me out of thin air. The resulting accident left me with a few minor damages that I'm finally getting around to fixing. One that's giving me trouble is this crossbar that's behind the grill/in front of the radiator. It got bent in the middle and I've been trying, using toyota's shoddy diagrams and such, to figure out what the part number is in order to replace it. Anyone have any ideas? I'm stumped. It's circled in blue.

https://imgur.com/MsbSShG

Also can someone tell me how the hell to upload images. Brain no work.

 

This might help. It appears to be: 57104A

 

Actually, wait nevermind. It's the one above it I need.

 

That piece is part of the cab.

 

OK, so you need a bolt in piece and not a weld in piece?

 

Yeah. Sorry, I'd take a shot of my own truck but it's dark and I can't remove my grille and bumper just now. Only get so much time to do this stuff with work and 8 month old.

 

Since that piece is just a bolt in piece, can’t you just get that part from a wrecking yard?

 

So you need number 6.


https://toyotaparts.mcgeorgetoyota....MIoLecyIWV7AIVBXiGCh3ERQUQEAQYASABEgIoD_D_BwE

 

If it's the bolt on pieces above it they should be Toyota part numbers 5252104050, 5212604020 and 5212504020. I'm looking to do a front end swap to mine so I saved all the numbers. Can anyone else can verify?

 

That's a good idea, I'll have to call up some of them around me and see if any have any Tacomas. I'd still like to have the part number though, if anyone knows it.

 

Yep, that looks like it to me.

 

That cross piece is made up of 3 pieces. Are you sure just the middle piece is bent?

 

If you're going from the 05-11 to 12-15 front end I have the full parts list here.

https://www.tacomaworld.com/threads/the-complete-list-2nd-gen-tacoma-front-end-conversion.597308/

 

Fairly certain, but I'm going to get the grille and bumper off, hopefully tomorrow, and make sure before I make a trip.

I only live near a few junk yards and looking at their websites (for whatever that's worth) they don't seem to have inventories of my model/year truck. I'll call around and see anyway. Luckily, if they don't, it looks like Rock Auto has 'em for a just a tenner.

 

Exactly what I'm looking to do, Thanks!

 

Yeah, you were right there were more parts in there damaged than I thought. That list @YotaProject posted was helpful to me as well lol. Damn it.

Tried the junkyards too. None of the pick and pull ones have any Tacomas, and the one other one I called wanted retail prices for used parts. No thanks.

 

Basically gonna need these two, in addition to the center support.

https://imgur.com/8TuZ9mn

https://imgur.com/JTlIFB0

Some new headlight assemblies, thankfully that should be the most expensive part. My aluminum bumper is a little bent too, but I'm going to leave that as is since I'll get an aftermarket bumper eventually anyway.

 

Here's a 12-15 front end picture if you need it.

 

Thank you @tomwil, how'd you do it though?