Led drl switch back bulbs

Has anyone installed a load resistor when installing led drl/turn signal bulbs on a 3rd Gen Tacoma? Looking for even a wiring schematic for the same functions if possible.
Thank you in advance.

 

I’ve done it, I used VLEDs resistors with there V6 triton bulbs. Wiring a resistor is the same regardless of vehicle. The power and ground are both connected to the resistor.
Just google and thousands of wiring diagrams for resistors will magically appear.

 

Been trying to specifically for the Tacoma but no luck already have the resistors just need the Toyota side.

 

What trim level and model year? They're not all the same.

 

7443/7440 for SR5, amber not switchbacks.

 

You might want to double check that.

My 2019 SR5 uses 7442NALL bulbs for the front turn signals/parking lights and DRL.

As far as I know all 3rd gen SR/SR5 are the same.

 

I’ll double check it triple check it and quadruple check it. VLEDS doesn’t even make a 7442NALL V6 Triton bulb. It’s a 7443 base, have been using them for the past few weeks. Feel free to contact them and ask them which V6 Triton bulb an SR5 uses. I guarantee you they won’t say a 7442NALL.
Stock bulbs are 7442NALL, but VLEDS have their own bases that plug in to the SR5 connector. It’s not just a cheap Amazon led you plug in to the stock DRL/turn signal socket.

 

@Kairide

I was referring to the OE bulbs, and assumed that you were also.

 

Nope, in post #2 I said I was running VLEDs V6 Triton bulbs.

 

2016 base model access cab

 

The least expensive, and least frustrating thing to do is to stick with the OE bulbs. No butchering up the factory wiring required.