Tacoma 2.7 2020 rumbling noise when shifting at 1500rpm????

Just bought my new Tacoma two months ago. ever since I bought it. Even on test drive i noticed a little rumbling noise when pressing he gas. especially at 1500rpm when its in drive mode. its not a huge noise but noticeable. sometimes louder than others. and not all the time.

before this i had an old 2000 dokata truck.

this is my first brand new truck. I figured since its brand new thats just part of how the truck sounds....for this 4 cylinder.

my question is this a normal sound??? for this truck??? anyone else with this truck hears It? Do I need to worry??

 

Does your acceleration stutter/,shudder?

 

I thought no that a good word for it. Not every time

 

warranty?

 

Yes brand new

 

I'd take it back to the dealership

 

Thats what I was leading to, that low of rpm and its lugging for sure

 

Lugging !!! That’s a good word for it. Almost like it needs more gas at times.

so is this normal for Toyota 2.7??

im so used to my old dodge 4 cylinder 2000. Manual

havnt drove a automatic.

 

Mines a manual and that only happens when I cause a problem. Id suggest taking to dealer thats not normal/good long term. Otherwise maybe pedal commander/OV tune might help.

 

Only has 1500miles on it

 

Yes, that’s how they are. I always manually shifted mine cause it would try to get to high gear at 15mph.

 

You try different gas ??

 

sounds like you need to take it back to the service department and explain

 

I would take to the service department for an investigation sounds like Mike Sweers is up to his old antics

 

My does a humming sound I found out later it’s the intake tube on passenger side when I get an oil change they didn’t close the clip completely or it’s the speaker cover on passenger side

 

I think the rumbling noise is the engine running

 

it could be but my doesn’t do it.. I have a 2.7 also sometime the fuel injector makes a splash sound

 

I have that same engine mines quiet as a church mouse

 

Maybe it’s just low torque

 

Can you record a sound clip when you hear the noise ?
Noises are very difficult to diagnose over a keyboard
If you put the truck in drive , hold the brakes and bring the revs up to 1500 , do you hear the same sound without allowing the truck to move ? Give it a try