Show off those 35's on 3rd gens

Nice!! I might do something different with the rear move then back an inch or two. Come down from inside the rear fender. I don’t have the rear high clearance like you yet

and if you do come up with something before I do for the front keep my posted. What did you do for your cab mount ?

 

Will do.

I just did a big cmc. I don’t rub now after alignment.

 

Nice that looks like the correct angle too. I had a shop do mine and they said they do them all the time. Come to find out they don’t and long story short they cut a lot but I still hit. So I am done messing with it and am going with the lil b relocation.

 

Ok here is 37s with the wheel well moved back

 

I take it you have LT? Doesn’t look like you had to tub too far back. Looks good though

 

If the rear of your front fenders don't look like this do you even have 35s? Still rubbing. Sigh.

 

35x11.5 r18 (285/75r18) on 18x9.5 -30mm. Barely rubs, little more fender liner and pinch weld and I'm in the clear.

 

Not looking forward to all the headaches but having 35s is a good problem to have. Can’t wait
​

 

I didn’t even realize this was a common “35” size. I’ll have to check into them. I’m on skinny 33’s and would like some “skinny” 35s. Do you have more pics you’d be willing to share?

 

Sure. I like them. Not as bubbly looking as the 315/12.50s, lighter, cheaper and way easier to stuff.

FYI I had wheels powdercoated since.

 

Nice

 

Is everyone here who's still rubbing maxed out on both their rear and front cams on their LCA?

 

Yup. Maxed out for Caster. It does help for sure.

 

I'm about to pull the trigger but want to get my alignment right before I get them mounted. I'm thinking I can max out my LCAs to push it foward, and then reduce castor up top through my UCAs to provide even more clearance, and still retain a good amount of positive caster. I have a CMC and pinch weld done...just need to trim the fenders.

 

It’ll prob still rub. I’ve got a few CMC, 4.5* caster, pinch weld beaten, bump stop spacer, and trimmed lower fenders and I still rub like crazy

 

Where are you rubbing the most? Cab mount still? Maybe I will have to do a relocate, but then I will need to modify my sliders since they're welded on where the cab mount relocation would go lol.

 

Still rub here with 3/8” bumpstops

 

31575R16 toyo MT

 

No trimming on the front bumper?

Edit: oh I see it now. Small amount.

 

Yup very minimal. I dont rub in the streets or at the mall.
Im going to sandstone canyon in anza borrego soon with my 35s which i will most likely rub, but ill do more trimming till then.